User manual SONY KDL-40D3000

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] When connecting an audio system, in addition to the HDMI cable, be sure to also connect the DIGITAL OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable. The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/f/G/g to move the TV programme screen position. HDMI control must be set on both the TV side and the connected equipment side. To return to single picture mode Press RETURN. Turns the connected equipment off interlocked with the TV. Turns the TV on interlocked with the connected equipment and automatically switches the input to the equipment when the equipment starts to play. If you turn on a connected audio system while the TV is on, the input switches to the audio from the audio system. You can switch the audible picture by selecting "Audio Swap" from the Tools menu. To watch the desired external input, select the input source, then press . "MENU" allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. Displays the "Settings" menu where most of the advanced settings and adjustments are performed. Unavailable options are greyed out or not displayed. * This function may not be available in some countries/ regions. You can select the options listed below on the "Picture" menu. Selects whether to apply settings made in the "Picture" menu to all inputs, or only to the input currently being watched. Selects the picture mode except for PC input source. This picture setting was developed in collaboration with Sony Pictures Entertainment to faithfully reproduce movies as intended by their creators. Resets all the "Picture" settings except "Target Inputs", "Picture Mode" and "Display Mode" to the factory settings. "Cool": Gives the white colours a blue tint. "Warm 2" gives a redder tint than "Warm 1". [. . . ] "On": Automatically switches between summer time and winter time according to the calendar. CA Module Set-up Allows you to access a pay TV service once you obtain a Conditional Access Module (CAM) and a view card. * Specified standby power is reached after the TV finishes necessary internal processes. Design and specifications are subject to change without notice. [. . . ]