User manual SONY KDL-40EX402

[. . . ] Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] Connect to the i socket to listen to sound from the TV on headphones. Headphones L Additional operation To Return to normal TV mode Do this Press DIGITAL or ANALOG. Continued 17 GB Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment. Options Close · · Description Closes the Tools menu. Picture Mode (except See page 20. PC input mode, USB input mode) Display Mode (in PC See page 20. input mode only) Sound Effect Speaker See page 21. See page 21. · · Horizontal Shift (in See page 22. PC input mode only) Vertical Shift (in PC input mode only) Sleep Timer (except PC input mode) Power Saving See page 22. See page 22. · · · · ­ Do not disconnect the USB cable. The data on the USB device may be damaged. Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV. USB playback is supported for the following photo file formats: ­ JPEG (JPEG format files with the extension ". jpg" and conforming to DCF 2. 0 or Exif 2. 21) When you connect a Sony digital still camera, set the camera's USB connection mode to Auto or "Mass Storage. " For more information about USB connection mode, refer to the instructions supplied with your digital camera. USB playback is supported for the following music file formats: ­ MP3 (files with the extension ". mp3" that have not been copyrighted) and WAV (files with the extension ". wav") USB Photo Viewer supports FAT16 and FAT32 file systems. "Vivid": For enhanced picture contrast and sharpness. "Standard": For standard picture. "Cinema": For viewing film-based content. Most suitable for viewing in a theatrelike environment. Selects the display mode for PC input source. "Text": For text, charts or tables. Adjusts the brightness of the backlight. Increases or decreases picture contrast. Increases or decreases colour intensity. Increases or decreases the green tones and red tones. z · "Hue" can only be adjusted for an NTSC colour signal (e. g. , U. S. A. video tapes). Display Mode (only in PC mode) Backlight Contrast Brightness Colour Hue Sharpness Sharpens or softens the picture. Colour Tone Adjusts the whiteness of the picture. [. . . ] You need to set "Home" for "Location" in the "Auto Start-up" procedure again (page 6). Picture No picture (screen is dark) and no sound · Check the aerial connection. · Connect the TV to the mains, and press 1 on the side of the TV. · If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the scart connector · Press to display the connected equipment list, then select the desired input. [. . . ]