User manual SONY KDL-40EX403

[. . . ] Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] The data on the USB device may be damaged. Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the TV. USB playback is supported for the following photo file formats: ­ JPEG (JPEG format files with the extension ". jpg" and conforming to DCF 2. 0 or Exif 2. 21) When you connect a Sony digital still camera, set the camera's USB connection mode to Auto or "Mass Storage. " For more information about USB connection mode, refer to the instructions supplied with your digital camera. USB playback is supported for the following music file formats: ­ MP3 (files with the extension ". mp3" that have not been copyrighted) and WAV (files with the extension ". wav") USB Photo Viewer supports FAT16 and FAT32 file systems. Up to 300 files per folder are supported. Depending on the exact file specifications, some files, including those modified on a PC, cannot be played even if the file format is supported. Check the website below for updated information about compatible USB devices. http://support. sony-europe. com/TV/compatibility/ Playing Back Photo/ Music via USB You can enjoy photo/music files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your TV. Using control for HDMI The control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. 1 2 3 4 Connect a supported USB device to the TV. Press F/f to select "Photo / Music, " then press . Selects the display mode for PC input source. "Text": For text, charts or tables. Adjusts the brightness of the backlight. Increases or decreases picture contrast. Increases or decreases colour intensity. Increases or decreases the green tones and red tones. z · "Hue" can only be adjusted for an NTSC colour signal (e. g. , U. S. A. video tapes). Display Mode (only in PC mode) Backlight Contrast Brightness Colour Hue Using MENU Functions Sharpness Colour Tone Sharpens or softens the picture. Adjusts the whiteness of the picture. "Cool": Gives the white colours a blue tint. "Neutral": Gives the white colours a neutral tint. "Warm": Gives the white colours a red tint. z · "Warm" can not be selected when you set "Picture Mode" to "Vivid". Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. "High/Medium/Low": Modifies the effect of the noise reduction. [. . . ] Picture or sound noise when viewing a TV channel · Adjust "AFT" (Automatic Fine Tuning) to obtain better picture reception (page 25). Some tiny black points and/or bright points appear on the screen · The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes · Select "Reset" (page 22). [. . . ]