User manual SONY KDL-40P3030 annexe 1

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. For a list of compatible cable providers, refer to the support web site: http://support. sony-europe. com/TV/ DVBC/ Trademark information is a registered trademark of the DVB Project Manufactured under license from BBE Sound, Inc. under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. [. . . ] 5 / PC IN PC It is recommended to use a PC cable with ferrites like the "Connector, D-sub 15" (ref. 1-793-504-11, available in Sony Service Centre), or equivalent. Use an optical audio cable. 6 DIGITAL AUDIO (PCM) OUT (OPTICAL) (except for KDL40S40xx/40U40xx/ 40L4000) 7 8 CAM (Conditional Access Module) You can listen to TV sound on the connected Hi-Fi audio equipment. For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the "dummy" card from the CAM slot, then turn off the TV and insert your CAM card into the slot. When you are not using the CAM, we recommend that you keep the "dummy" card in the CAM slot. ~ · CAM is not supported in some countries/areas. 0 AV3, and AV3 AV3 When connecting mono equipment, connect to the socket. You can listen to TV sound through headphones. AV3 L qa i Headphones 22 GB 3 Press the number buttons or PROG +/­ to Viewing Pictures from Connected Equipment Turn on the connected equipment, and perform one of the following operations. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead select the TV channel. To return to single picture mode Press or RETURN. z · The picture framed in green is audible. You can switch the audible picture by pressing G/g. Start playback on the connected equipment. The picture from the connected equipment appears on the screen. For an auto-tuned recorder To view two pictures simultaneously ­ PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. See "HDMI Set-up" on page 30 for the TV side settings. For settings on the connected equipment, refer to the operating instructions for that equipment. To connect the equipment that is compatible with control for HDMI Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO (PCM) OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable (except for KDL40S40xx/40U40xx/40L4000). For details, see page 21. 24 GB Using Menu Functions Navigating through menus Menu functions allow you to enjoy various convenient features of this TV. You can easily select channels or input sources, and change the settings for your TV. · To select the equipment that is compatible with control for HDMI, select "HDMI Device Selection". 6 Settings Displays the "Settings" menu where most of the advanced settings and adjustments are performed. 1 Press F/f to select a menu item, then press . 2 Press F/f/G/g to select an option or adjust a setting, then press . For details about settings, see pages 26 to 34. 2 1 1 Press MENU. 2 Press F/f to select an option, then press . To exit the menu, press MENU. ~ · The options you can adjust vary depending on the situation. Unavailable options are greyed out or not displayed. [. . . ] · When installing optional equipment, leave some space between the optional equipment and the TV. · Check the aerial/cable connection. · Keep the aerial/cable TV cable away from other connecting cables. There is picture or sound noise · Adjust "AFT" (Automatic Fine Tuning) to obtain better picture when viewing a TV channel. [. . . ]