User manual SONY KDL-40S2510

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 13 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] aV4/ AV5: Digital audio/video signal is input through the HDMI IN 4/5 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket. AV6/ AV6: Video input signal through the video socket 6, and audio input signal through the L (MONO), R audio sockets 6. Appears only if the equipment is connected to the S video socket 6 instead of the video socket 6, and S video input signal is input through the S video socket 6. Press TOOLS to display the following options when viewing pictures from connected equipment other than PC. "MENU" allows you to enjoy various convenient features of this TV. You can easily select channels or external inputs with the remote. Also, settings for your TV can be changed easily using "MENU". Menu Digital Favourites (only in areas with digital broadcasting) Analogue (only in areas with digital broadcasting) Digital (only in areas with digital broadcasting) Digital EPG (only in areas with digital broadcasting) External Inputs Description To watch the desired external input, select the input source, then press . Opens the Settings menu screen where most of advanced settings and adjustments are performed. Select a menu icon, select an option and make the desired change or adjustment using F/f/G/g. You can select the options listed below on the Picture menu. Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched. "Custom": Allows you to store your preferred settings. Resets all picture settings except "Picture Mode" to the factory settings. "Backlight" is not available when you set "Power Saving" to "High" (page 26). "Cool": Gives the white colours a blue tint. "Warm2" gives a redder tint than "Warm1". tip "Warm1" and "Warm2" can only be selected when you set "Picture Mode" to "Custom". Reduces the picture noise (snowy picture) in a weak broadcast signal. When you set "Picture Mode" to "Custom", you can set/change these settings. This setting is especially effective for dark images, increasing vibrancy in the picture. [. . . ] 3 W * Specified standby power is reached after the TV finishes necessary internal processes. Design and specifications are subject to change without notice. This TV's PC input does not support Sync on Green or Composite Sync. This TV's PC input does not support interlaced signals. [. . . ]