User manual SONY BRAVIA KDL-40S5100 DATASHEET

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] When AV3 Output or AV4 Output is set to Auto, the signals input through the AV5 input, PC input and "Memory Stick" input are not output from Scart connectors 3/ S or 4/ . Both Scart connectors 3/ S and 4/ cannot support SmartLink at the same time. Some DVD recorders may have 576p signal format. The Scart connector does not accept 576p signal format on its own. If you wish to input the signal just as it is, connect the DVD recorder to both the Scart connector 4/ and Y, PB/ CB, PR/CR jacks of 5. Logo Illumination The "Logo Illumination" option allows you to illuminate the SONY logo on the front panel of display unit in blue. The "Set Up" menu allows you to alter various options on this TV. The "Language/Country" option allows you to select the language that the menus are displayed in. It also allows you to select the country in which you wish to operate the TV set. The "Auto Tuning" option allows you to automatically search and store all available TV channels. The "Programme Sorting" option allows you to change the order in which the channels (TV Broadcast) appear on the screen. Press / / or to select the letter, then press OK. When you have finished, press / / or to select the word "End" on the screen and press OK to turn off the menu from the screen. To correct the letter, select on the screen to go back and press OK. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture if the picture is distorted. Whilst watching the channel (TV Broadcast) you wish to finetune, select the AFT option and press . Then press select OK and finally press OK to store. D) Skip any unwanted programme numbers when they are to do this: 1 2 3 4 Highligh the Programme option , press PROG +/- to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press . Then press select OK and finally press OK to store. To cancel this function afterwards, select No instead of Yes in the step above. View and record scrambled channels when using a decoder connected to the Scart connectors 3/ S or 4/ either directly or via a VCR. [. . . ] The accumulated dust may make the cooling function of the built-in fan less effective. To prevent this, we recommend removing the dust periodically (once a month) using a vacuum cleaner. If the item you want to select appears in a pale colour, you cannot select it. Changes in room temperature sometimes causes the TV cabinet to expand or contract, which can make slight noises. [. . . ]