User manual SONY KDL-40V2900

[. . . ] 3-281-522-11(1) LCD Digital Colour TV Operating Instructions Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. KDL-46T35xx KDL-40T35xx KDL-40V29xx For useful information about Sony products © 2007 Sony Corporation NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. [. . . ] "Off": Turns off the Noise Reduction feature. Customizes the Picture function in more detail. When you set "Picture Mode" to "Custom", you can set/change these settings. "Reset": Resets all the advanced video settings to the factory settings. "Black Corrector": Enhances black areas of the picture for stronger contrast. Contrast Enhancer": Automatically adjusts "Backlight" and "Contrast" to the most suitable settings judging from the brightness of the screen. This setting is especially effective for dark images scenes. It will increase the contrast distinction of the darker picture scenes. "Gamma": Adjusts the balance between bright and dark areas of the picture. "Clear White": Emphasizes white colours. "Live Colour": Makes colours more vivid and reproduces clear skin tones. "Colour Space": Changes the colour reproduction gamut. "Wide" reproduces the vivid colour and "Normal" reproduces the standard colour. "MPEG Noise Reduction": Reduces the picture noise in MPEG-compressed video (in digital mode only). Tip "Live Colour" is not available when "Colour Space" is set to "Normal". Advanced Settings Using MENU Functions 21 GB Sound menu You can select the options listed below on the Sound menu. To select options in "Settings", refer to "Picture menu" (page 20). Target Inputs Selects whether to apply settings made in the Sound menu to all inputs, or only to the input currently being watched. "All": Applies settings to all inputs. "Viewing Only": Applies settings only to the current input. "Dynamic": Enhances treble and bass. "Standard": For standard sound. Also allows you to store your preferred settings. Resets the sound settings except "Sound Mode", "Dual Sound" and "i Speaker Link" to the factory settings. Emphasizes left or right speaker balance. [. . . ] · Check the aerial location and direction. · Check if the aerial is broken or bent. · Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). · Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. [. . . ]