User manual SONY KDL-40W2000

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] Press the blue button to return to the Favourite list. A display appears to confirm that you want to delete all channels from the Favourite list. Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead (page 38) Start playback on the connected equipment. For other connected equipment (page 37) Press / repeatedly until the correct input symbol (see below) appears on the screen. Press TOOLS to display the following options when viewing pictures from connected equipment other than PC. "MENU" allows you to enjoy various convenient features of this TV. You can easily select channels or inputs sources and change the settings for your TV. To watch the desired external input, select the input source, then press . Displays the Settings menu where most of the advanced settings and adjustments are performed. Unavailable options are greyed out or not displayed. You can select the options listed below on the Picture menu. Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched. Selects the picture mode except for PC input source. "Custom": Allows you to store your preferred settings. Resets all picture settings except "Target Inputs", "Picture Mode" and "Display Mode" to the factory settings. "Backlight" is not available when you set "Power Saving" to "High" (page 29). "Cool": Gives the white colours a blue tint. "Warm2" gives a redder tint than "Warm1". tip "Warm1" and "Warm2" can only be selected when you set "Picture Mode" to "Custom". Reduces the picture noise (snowy picture) in a weak broadcast signal. When you set "Picture Mode" to "Custom", you can set/change these settings. [. . . ] DVD recorder VCR Decoder Video game equipment DVD player Decoder Press TOOLS to display the following options when viewing pictures input from the connected PC. 3 W * Specified standby power is reached after the TV finishes necessary internal processes. Design and specifications are subject to change without notice. This TV's PC input does not support Sync on Green or Composite Sync. [. . . ]