User manual SONY KDL-40W4710

[. . . ] 6A/2006 is the General Authorization for the use of Radiofrequencies by Radio Local area Networks and by Wireless Access Systems, including Radio Local Area Networks (WAS/ RLAN). S Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG-2 and H. 264/MPEG-4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG-2 and H. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. [. . . ] Qa i Headphones qs USB You can listen to monitor sound through headphones. You can enjoy photo files stored in a Sony digital still camera or camcorder through a USB cable or USB storage device on your unit (page 27). Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f. If you have set an input source to "Skip" in the "AV Preset" menu (page 32), that input source does not appear in the list. Using the Options menu Press OPTIONS to display the following options when viewing pictures from connected equipment. You can enjoy photo files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your unit. When you select a folder, select a file, then press . While the unit is accessing the data on the USB device, observe the following: ­ Do not turn off the unit or connected USB device. Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the unit. For more information about USB connection mode, refer to the instructions supplied with your digital camera. When connecting an audio system*, be sure to also connect the DIGITAL AUDIO OUT (OPTICAL) socket of the media receiver and the audio system using an optical audio cable. The XMBTM is an easy way to select programming and adjust settings on your media receiver. You can make advanced settings and adjustments. for details about settings , see page 30. You can enjoy photo files via USB devices (page 27). you can select a digital channel , Favourite list (page 23) , or Guide (page 22). You can also select a channel using the number buttons or PROG +/­. You can also select a channel using the number buttons or PROG +/­. Unavailable options are greyed out or not displayed. Quick Start Timer Settings The unit turns on faster than usual within two hours after switching to standby mode. However, power consumption in standby mode is 38 watt higher than usual. [. . . ] For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. 2 Press 1 on the unit to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When it is not flashing Press / to display the connected equipment list, then select the information from equipment desired input. Only snow and noise appear · Check if the aerial has reached the end of its serviceable life (three to analogue mode) five years in normal use, one to two years at the seaside). [. . . ]