User manual SONY KDL-40WL135

[. . . ] 3-295-148-12(1) LCD Digital Color TV Operating Instructions KDL-40WL135 KDL-46WL135 KDL-52WL135 © 2007 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV. Model Name Serial No. WARNING To reduce the risk of fire or electric shock, do not expose this TV to rain or moisture. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna. [. . . ] · Detailed information of digital rating will appear if Digital Rating is selected when an icon to inform you the digital rating information appears. Press to turn on and off Closed Captions (CC). To change or customize CC Display, see page 35. Press to jump back and forth between two channels. The TV alternates between the current channel and the last channel that was selected. JUMP JUMP ql CC w; JUMP wa CH +/­ Press to scan through channels. To scan quickly through channels, press and hold down either +/­. 23 Indicators 1 PIC OFF/TIMER STANDBY POWER 2 Item Description 3 4 5 1 Speaker 2 PIC OFF/ TIMER LED 3 STANDBY LED Outputs the audio signal. Lights up in green when the Picture Off feature is activated. Lights up in orange when the timer is set. When the timer is set, this LED will remain lit even if the TV is turned off. Lights up in red when your TV is in PC standby mode. If the LED blinks in red continuously, this may indicate the TV needs servicing (see contacting Sony information on the back cover). Lights up in green when the TV is turned on. Receives IR signals from the remote control. Senses room light level and adjusts the screen brightness accordingly (see page 39 for details). Do not put anything near the sensor, as its function may be affected. 4 POWER LED 5 (IR) Infrared Receiver/Light Sensor 24 Using P&P and PIP Features This TV comes with the P&P and PIP features which allow you to view two pictures simultaneously. P&P (picture and picture) provides two windows side by side. PIP (picture in picture) provides PC input signal and TV channels. ~ · To swap audio in P&P mode, use the B/b button to swap the highlight between the main window and sub window. · To swap audio in PIP mode, press OPTIONS, then press V/v to highlight Audio Swap. · 1080p signal cannot be displayed for Component 1/2 in the sub window in P&P mode. · For compatible PC Timings, refer to the PC Input Reference Chart (see page 16). ~ · The VHF/UHF/CABLE input must be connected to use the PIP feature. · For the PIP feature, Closed Caption (CC) is not available. P&P Using the TV Features To Change Inputs or Channels in the Window Press B/b to highlight the window to change, and press INPUT to select the input to watch, or press CH +/­ to change channels or enter the channel number using the 0-9 numeric buttons. Main window Sub window ~ PIP Sub window (Location of the sub window can be moved by pressing Main window (PC) · You may also press JUMP to change channels. [. . . ] Prevent the TV from Toppling s Secure the TV to a wall and/or stand. s Do not allow children to play or climb on furniture and TV sets. s Avoid placing or hanging items on the TV. s Never install the TV on: · slippery, unstable and/or uneven surfaces. [. . . ]