User manual SONY BRAVIA KDL-40XBR7

[. . . ] 10 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 OSD Functions PICTURE PARAMETERS: Brightness / Contrast / Saturation / Hue / Color Temp / Sharpness / Aspect Ratio / Backlight / Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 PC PARAMETERS: Auto Adjust / Clock / Phase / Position. . . . . . . . . . . . . . . . . . 16 AUDIO SETTINGS: Volume / Bass / Treble / Balance / Mute / Speaker / Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PICTURE-IN-PICTURE: Display Mode / Main Source / PIP Source / Swap / PIP Position / PIP Size / Audio From. . . . . [. . . ] If the provided plug does not fit into your wall outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at the ends of the cord. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the HD Monitor. When a cart is used, use caution when moving the cart to avoid injury or damage. English 13) Unplug the HD Monitor during lightning storms or when it is not being used for a long period of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the HD Monitor has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the HD Monitor, it has been exposed to rain or moisture, it does not operate normally, or the TV has been dropped. Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the HD Monitor, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Lightning For added protection for the HD Monitor during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the HD Monitor due to lightning and power-line surges. Do not disconnect the antenna or the power cord during a heavy storm ­ lightning may strike while you are holding the cable cord, causing serious injury. Turn off your HD MONITOR and wait for the weather to improve. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits. Wipe the screen with a clean, soft, lint-free cloth. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. English To clean the screen: To clean the case: 1. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild nonabrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. Disclaimer Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on the HD Monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or HD Monitor case. Westinghouse Digital will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners. 5 INSTALLATION Package Contents Your product package includes: · 42" Westinghouse HD Video Monitor · Remote Control (with batteries) · Power Cord · Quick Connect Guide · User's Manual · Warranty Card English 6 Front View of the HD Video Monitor Use the buttons on the right side of the HD Monitor or on the remote control to display the On Screen Display (OSD). The OSD controls are defined in "OSD Functions" on page 12. English "IR" receiver and LED indicator Speakers Rear View of the HD Video Monitor 7 Side View of the HD Video Monitor English 1. Power Button / Turn OSD Menu ON/OFF Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu. Highlight a control while in the OSD Menu. Select Active Video Input or choose a selection while in the OSD MENU. Turn Power ON/OFF 8 Side View of the HD Video Monitor 1. DVI2 (Supports up to 1080p Full HD) Using a 20-pin DVI cable, connect to a computer, HD Digital cable/satellite receiver, HD Set-Top-Box, DVD or other device with a DVI output. [. . . ] YPbPr2 Audio 2 Input (Left / Right) Connect an external audio source to this jack. AC IN (Power) Connect the power cord from AC IN to a power source. English 9 Remote Control The Remote Control will transmit to the HD Monitor up to 10 feet away. English 1. OSD SUB-MENU SELECTION Select OSD sub-menu option directly 4. PREVIOUS OSD MENU Select previous OSD menu 5. [. . . ]