User manual SONY KDL-40ZX1

[. . . ] LCD Digital Colour TV Operating Instructions KDL-40ZX1 For useful information about Sony products 4-128-850-12(1) Printed in Spain © 2008 Sony Corporation 4-128-850-12(1) NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with the same rating of fuse, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] See page 43. Press / to display a list of connected equipment. Press F/f to select the desired input source, then press . The highlighted item is automatically selected if you do not perform any operation for two seconds after pressing F/f. If you have set an input source to "Skip" in the "AV Preset" menu (page 35), that input source does not appear in the list. z · To return to normal TV mode, press DIGITAL/ ANALOG. See page 45. See page 45. See page 31. Switch to media receiver inputs. Using the Options menu Press OPTIONS to display the following options when viewing pictures from connected equipment. When equipment is connected to the media receiver sockets Option Description If wireless communication is not successful Option Description Wireless Channel Set-up Use MONITOR HDMI See page 46. Switch to MONITOR HDMI input. Picture Mode (except See page 42. PC/HDMI PC input mode) Sound Mode Speaker Motionflow (except PC/HDMI PC input mode) See page 44. See page 43. 29 GB Using USB Photo Viewer You can enjoy photo files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your unit. 1 Connect a supported USB device to the media receiver. 2 Press HOME. 3 Press G/g to select "Photo", then press F/ f to select "USB Photo Viewer" and press . The thumbnail screen appears. 4 Press F/f/G/g to select a file or folder, then press . When you select a folder, select a file, then press . Playback starts. 5 Press RETURN to go back to the thumbnail screen. Additional operations Option Description · While the unit is accessing the data on the USB device, observe the following: ­ Do not turn off the unit or connected USB device. The data on the USB device may be damaged. · Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the unit. · USB photo viewer supports DCF-compliant JPEG photographs only. · When you connect a Sony digital still camera, set the camera's USB connection mode to Auto or "Mass Storage". For more information about USB connection mode, refer to the instructions supplied with your digital camera. · USB Photo Viewer supports FAT32 file system only. · Depending on the exact file specifications, some files, including those modified on a PC, cannot be played even if the file format is supported. · Check the website below for updated information about compatible USB devices. http://support. sony-europe. com/TV/compatibility/ To display a photograph -- Picture Frame You can display a photograph on the screen for a selected period of time. [. . . ] "Wireless communication in · When the wireless communication is disturbed, it takes about 15 seconds progress. " does not disappear, to display pictures again. "Wireless communication in progress. " is or "Wireless communication displayed until pictures come back. failed. " is displayed · Check the installation situation of the monitor and media receiver (page 4). · Check whether wireless equipment using the same radio frequency as this unit is working near by, or something disturbing wireless communication of this unit is close to the unit. [. . . ]