User manual SONY BRAVIA KDL-46SL140

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service centre. ASA How to replace the Fuse Open the fuse compartment with a flat blade screwdriver, and replace the fuse. FUSE IMPORTANT If the plug supplied is not suitable for the socket outlet in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire to the earth terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green and yellow. WARNING · · · To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. [. . . ] Press the V or v button to highlight `System Information' then press the OK button to display the System Information display. Press the BLUE button repeatedly until all menus are removed from the screen. OK CAM Setup (depending on availability of service) This feature allows you to access a pay-TV service once you have obtained a Conditional Access Module (CAM) and a viewing card. Please contact a pay-TV supplier for details. 1. Switch off the TV and unplug from the mains, and insert the CAM into the socket on the rear of the TV. Note: If you have already attached the door that covers the rear sockets you will have to unscrew and remove this to gain access to the CAM socket. 2. 4. After inserting your viewing card into the CAM, connect the TV to the mains and switch on. Press the button on the remote control to obtain the Digital Info display, then press the BLUE button to display the Main menu. Press the V or v button to highlight `CAM Setup', then press the OK button to display the set up menu of the service provider. 18 Digital features The Channel Index menu The Channel Index menu provides a quick and easy way to:a) View a complete list of programmes available for selection b) Obtain a preview of the programmes contained in the list c) Create a list relating to a category of programme, e. g. Sports or Movies d) Store programmes into a personal favourite list 1. The Channel Index menu is only available in digital mode. To check you are in digital mode, press the DIGITAL/ button on the remote control. An information banner appears briefly on screen when you change channels. If the banner does not appear, press the DIGITAL/ button. Press the BLUE button to store the programme in the favourite list. To remove a programme from the Favourite list: 1. 5. With the Channel Index menu on screen, press the YELLOW button to access the Category pop-up menu. Press the V or v buttons to highlight the `Favourite' category. Press the OK button to display the Favourite category list. Press the V or v buttons to highlight the programme you wish to remove from the Favourite list. Press the BLUE button to remove the programme. Press the YELLOW button and select the category you wish to return to, then press the OK button. 20 Digital features The EPG menu The EPG menu (Electronic Programme Guide) provides a quick and easy way to:a) View a complete list of the programmes available. b) Obtain a preview of the programmes currently being broadcast. c) Create a list relating to a category of programme, e. g. d) Record programmes. 1. The EPG menu is only available when watching digital channels. To check you are in digital mode, press the DIGITAL/ button on the remote control. [. . . ] Select `Picture Adjustment' menu then adjust the brightness, picture and colour levels. Use the `Manual Tuning' instructions of this manual to tune in all available analogue channels. Then contact a local installer to find out when digital transmissions begin in your area. Contact a local installer to find out at which transmitter your aerial should be pointing. [. . . ]