User manual SONY BRAVIA KDL-46VL150 QUICK SETUP GUIDE

[. . . ] To prevent the risk of fire or electric shock, do not expose the TV set to rain or moisture. Dangerously high voltages are present inside the TV set. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] Set the time and date of a programme you want to record ­ Manual timer REC Set the start and stop time in the same way as in step 3. Press M/m to select the channel, then press OK to set the TV and your VCR timers. You can set VCR timer recording on the TV only for Smartlink compatible VCRs. If your VCR is not Smartlink compatible, a message will be displayed to remind you to set your VCR timer. Once a recording has begun, you can switch the TV to standby mode, but do not switch off the TV completely or the recording may be cancelled. If an age restriction for programmes has been selected, a message asking for pin code will appear on the screen. Press M/m to select the programme you want to cancel, then press OK. A message appears asking if you want to add channels to the Favourite list when the Favourite list is blank. Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list when you press for the first time. Press M/m to select the channel you want to add, then press OK. If there are more than five channels in the list, press the green button for the next five channels or press the red button for the previous five channels. Press </, to set the level, then press OK. Press M/m to select one of the following, then press OK. Cool: Gives the white colours a blue tint. Reduces the picture noise (snowy picture) in a weak broadcast signal. Press M/m to select one of the following, then press OK. CNR: Reduces the picture noise when the animation image is received. This is effective for digital channels, or a connected DVD player/digital satellite receiver with MPEG playback. Adjusts the balance between bright and dark areas of the picture. Press M/m to set the level, then press OK. Reset all the picture settings to the factory settings. You can select the options listed below on the Sound Adjustment menu. [. . . ] 1 Count how many 1 (standby) indicator flashes between each two second break. For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. Press 1 on the TV (right side) to switch it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When it is not flashing 1 Check the items in the tables below. [. . . ]