User manual SONY BRAVIA KDL-46W5100

[. . . ] If any liquid or solid object does fall through, do not operate the TV. Do not open the cabinet and the rear cover of the TV. For your own safety, do not touch any part of the TV, power lead or aerial lead during lightning storms. To prevent fire or shock hazard, do not expose the TV to rain or moisture. [. . . ] Once the programme you want is highlighted, press the OK button to preview the programme on screen. If however, you have previously allocated a Parental Control age limit in the Main Menu, and the programme exceeds that limit, you will be asked to enter your PIN before the preview is allowed. Programmes that exceed the age limit are identified by a symbol. With the Channel Index menu on screen, press the V or v buttons to highlight the channel you want as a favourite. press the YELLOW button to display the `Add' pop-up menu. Press the V or v buttons to select the personal folder in which you wish to store the channel, then press OK to confirm. The Channel Index will now only contain programmes relating to your chosen category. Some examples of category types are as follows: Choice This is a list compiled from the programmes you view most often. This list contains the last 5 channels you have watched. Fav1 This list contains channels you have stored in this folder as favourites. Movies This list contains all the movies available for viewing. B) Wake up Highlight `Wake up' and press OK if you wish the future programme you selected to automatically appear on screen when transmission starts. When you use this option a solid green bar appears under the timer bar in the menu. This indicates that a wake up request has been activated. Just before transmission begins, a reminder will appear on screen asking you if you still wish to view the programme. C) Manual Highlight `Manual' and press OK if you wish the TV to output a channel to your VCR for recording when the transmission begins. Press the V or v button to set the day of recording, then press the b button to move to the start time. Repeat this procedure to set the start and stop times and the channel number, then press the OK button to store and return to the EPG menu. press the button to remove the EPG menu. Unless you have a Smartlink VCR, you must now set the timer recording function of your VCR to switch on and off to correspond with the programme you have stored for recording. Notes on recording: The `Manual' feature only works if you have connected your VCR to the AV3 socket 3 s3 on the rear of the TV. After you have programmed a recording you can put the TV into its standby mode, but do not switch off completely or the recording will be cancelled. [. . . ] If not, repeat steps 2 - 4 and enter the next 3 digit code allocated to your brand of VCR or DVD. When you wish to use the remote control to operate the TV again, press the MODE button until the TV green light illuminates. Don't forget to select VCR or DVD using the MODE button every time you wish to operate that equipment with this remote control. Note: The brand codes you set may be lost if weak batteries are not replaced immediately. [. . . ]