User manual SONY KDL-46X2000

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 13 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] To watch the desired external input, select the input source, then press . Displays the Settings menu where most of the advanced settings and adjustments are performed. * This function may not be available in some countries. You can select the options listed below on the Picture menu. For the input currently being viewed, select whether to use the common setting or to set each item separately. "Common": Applies common settings whose adjustments are shared with other inputs in which "Target Inputs" is set to "Common". AV1): Allows you to set each option separately for the current input. "Custom": Allows you to store your preferred settings. Resets all the "Picture" settings except "Target Inputs" and "Picture Mode" to the factory settings. "Cool": Gives the white colours a blue tint. "Warm 2" gives a redder tint than "Warm 1". tip "Warm 1" and "Warm 2" can only be selected when you set "Picture Mode" to "Custom". This is effective for digital channels, or a connected DVD player/digital satellite receiver with MPEG playback. "Auto" is not available when watching component, HDMI or digital RF inputs. â· "Noise Reduction" is not available when using Freeze or PAP features. "DRC Mode" is not available when "Game Mode" is set to "On" or when using Freeze or PAP features; also not available when watching 480p, 576p, 720p, 1080i or 1080p sources. Customizes the level of detail ("Reality") and smoothness ("Clarity") for each input signal. For example, you can create one custom setting to optimize your cable input picture, and create another to optimize your DVD player's picture. As you move the z higher along the "Reality" axis, the picture becomes more detailed. As you move the z to the right along the "Clarity" axis, the picture becomes smoother. "DRC Palette" is not available when "Game Mode" is set to "On", "DRC Mode" is set to "Off" or when using Freeze or PAP features; also not available when watching 480p, 576p, 720p, 1080i or 1080p sources. When you set "Picture Mode" to "Custom", you can set/change these settings. [. . . ] Design and specifications are subject to change without notice. This TV's PC input does not support Sync on Green or Composite Sync. â· This TV's PC input does not support interlaced signals. â· For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. [. . . ]