User manual SONY BRAVIA KDL-46Z5100

[. . . ] To prevent the risk of fire or electric shock, do not expose the TV set to rain or moisture. Dangerously high voltages are present inside the TV set. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] For other connected equipment Press / repeatedly until the correct input symbol (see below) appears on the screen or press OK to access the Input signal index table. 3: Component input signal through the Y, PB/CB, PR/CR sockets / 3, and audio input signal through the L/G/S/I, R/D/D/D sockets / 3. 4/ 4: Video input signal through the video socket 4, and audio input signal through the audio socket L/G/S/I (MONO), R/D/D/D sockets 4. Appears only if the equipment is connected to the S video socket 4 instead of the video socket 4, and S video input signal is input through the S video socket 4. 5: RGB input signal through the PC connectors audio input signal through the socket 5. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket. The following options are available in each menu. You can select the options listed below on the Picture Adjustment menu. When you set the "Picture Mode" option to "Vivid" or "Standard, " you can adjust only "Contrast, " and "Reset. Press m/M to select one of the following picture modes, then press OK. Custom: Allows you to store your own prefered settings. Automatically changes the screen format according to the broadcast signal. Even if you have selected "On" or "Off" in "Auto Format", you can always modify the format of the screen by pressing repeatedly. Adjusts the horizontal picture position so that the picture is in the middle of the screen. Press </, to adjust the centre of the picture between -5 and +5, then press OK. tip This option is only available if an RGB source has been connected to the Scarts connectors 1/ 1 or 2/ 2 on the rear of the TV. You can select the options listed below on the Features menu. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. Press m/M to select one of the following, then press OK. Auto: Outputs whatever is being viewed on the screen. Press m/M to select one of the following, then press OK. On: the sound is output from the TV speakers. [. . . ] Power Requirements: 220­240 V AC, 50 Hz Screen Size: KDF-E50A11E: 50 inches BRAVIA KDL-46Z5100: 42 inches Display Resolution (horizontal x vertical): 1280 dots x 720 lines Power Consumption: 175 W Standby Power Consumption: 0, 8 W Dimensions (w × h × d): KDF-E50A11E: Approx. Design and specifications are subject to change without notice. This TV does not support Sync on Green or Composite Sync. If a signal other than in the above chart is input, it may not be displayed properly or may not be displayed as you set. [. . . ]