User manual SONY KDL-52NX800

[. . . ] If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Trademark information · is a registered trademark of the DVB project. [. . . ] All categories Contains all available channels. Press OK. The Digital Electronic Programme Guide (EPG) now only displays the current programmes from the category selected. Set a programme to be recorded ­ Timer REC 1 2 3 4 Press m/M/</, to select the future programme you want to record. Press m/M to select "Timer REC". Press OK to set the TV and your VCR timers. A symbol appears by that programme's information. Notes · You can set VCR timer recording on the TV only for Smartlink compatible VCRs. If your VCR is not Smartlink compatible, a message will be displayed to remind you to set your VCR timer. · Once a recording has begun, you can switch the TV to standby mode, but do not switch off the TV completely or the recording may be cancelled. 16 To Set a programme to be displayed automatically on the screen when it starts ­ Reminder Do this 1 2 3 4 Press m/M/</, to select the future programme you want to display. Press m/M to select "Reminder". Press OK to automatically display the selected programme when the programme starts. A c symbol appears by that programme's information. Note If you switch the TV to standby mode, it will automatically turn itself on when the programme is about to start. Set the time and date of a programme you want to record ­ Manual Timer REC Watching TV 1 2 3 4 5 Press OK. Press m/M to select "Manual Timer REC". Press m/M to select the date, then press , . 5: RGB input signal through the PC connectors audio input signal through the socket 5. 5, and 2, 3, 4 4 1 1 2 3 4 Press MENU to display the menu. Press M/m to select a menu icon, press , . Press M/m/</, to change/set the setting, then press OK. To exit the menu, press MENU. To return to the last display, press <. 6: Digital audio/video signal is input through the HDMI IN 6 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket. Additional operations To Do this . Return to the normal Press DIGITAL or TV operation Access the Input signal index table Press OK. Press , to select an input source, press m/M, then press OK. Continued 19 Overview of the menus The following options are available in each menu. For details on navigating through menus, see (page 19). Also, see page in parentheses for details of each menu. 5 Timer Sleep Timer (28) Clock Set (28) Timer (28) Set Up Auto Start Up (29) Auto Tuning (29) Programme Sorting (29) Programme Labels (30) AV Preset (30) ­ Label/Skip Manual Programme Preset (30) ­ Programme/Channel/Label/AFT/Audio Filter/Skip/ATT/Confirm Digital Set Up (32) ­ Digital Tuning/Digital Set-up 6 Picture Adjustment 1 2 3 4 5 6 Picture Mode Contrast Brightness Colour Hue Sharpness Co lo u r Tone Reset Noise Reduction Iris Custom Max 50 50 0 15 Warm Auto High Select: Set: OK End: MENU 1 Picture Adjustment Picture Mode (21) Contrast/Brightness/Colour/Hue/ Sharpness (21) Colour Tone (21) Reset (22)) Noise Reduction (22) Iris (22) 2 Sound Adjustment Sound Effect (23) Treble/Bass/Balance (23) Reset (23) Dual Sound (24) Auto Volume (24) Screen Auto Format (25) Screen Format (25) RGB Center (25) Features AV2 Output (26) TV Speakers (26) PC Adjustment (27) 3 4 20 Picture Adjustment menu Picture Adjustment Picture Mode Contrast Brightness Colour Hue Sharpness Colour Tone Reset Noise Reduction Iris Custom Max 50 50 0 15 Warm Auto High You can select the options listed below on the Picture Adjustment menu. To select options, see "Navigating through menus" (page 19). Tip When you set the "Picture Mode" option to "Vivid" or "Standard, " you can adjust only "Contrast, " and "Reset. " Select: Set: OK Back: End: MENU Picture Mode Selects the picture mode. Using the Menu 1 2 Press OK to select "Picture Mode". [. . . ] · Check the aerial location and direction. · Check if the aerial is broken or bent. · Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). · Keep the TV away from electrical noise sources such as cars, motorcycles, or hair-dryers. [. . . ]