User manual SONY BRAVIA KDL-52S4100

[. . . ] Do not install the projection TV where it may be exposed to mechanical vibrations. avoid operating the projection TV at temperatures below 5°C (41°F). If the projection TV is transported directly from a cold to a warm location, or if the room temperature has changed suddenly, the picture may be blurred or show poor color. This is because moisture has condensed on the mirror or lenses inside. [. . . ] The first twelve preset programs appear one by one, clockwise from the upper left corner. When you press the PROG INDEX button in the TWIN pictures mode, the left picture appears as the main screen of the PROGRAM INDEX mode. To view the next or the previous twelve preset programs This works only when the number of the preset TV programs is more than twelve. 1 Move up, down, left or right to move the frame to the screen of the program you want to watch. Press PROG INDEX again, or: 1 Select "PROGRAM INDEX" from the "MULTI PICTURE" menu. You can also display multiple programs using the menu (see "Changing the MULTI PICTURE setting" on page 41). notes · When displaying multiple programs, only the sound of the main screen is heard. Listening with surround sound The surround feature enables you to enjoy the sound effects of a concert hall or movie theater. To listen to the surround sound that spreads out to the rear of a room. You can enjoy stereo sound or bilingual programs of NICAM and A2 (German) stereo systems. When you receive the channel with them, the indicator on the front panel of the projection TV lights up red. The settings other than the following items in the menu can be reset by using the RESET button: ­ "LANGUAGE" ­ "CONVERGENCE" ­ "PROG" in "MANUAL PROGRAM" and "PROGRAM SETUP" ­ "FINE" in "MANUAL PROGRAM" ­ "TV SYS" ­ "SKIP" How to use the menu Move the button joystick ( ) up, down, left or right to select the desired item. If you want to exit from Menu level 2 to Menu level 1, move up or down until the return icon (3) is highlighted, then press . The MENU, ENTER, and 2 +/­ (up/down) buttons on the projection TV can also be used for the operations above. note · If more than 60 seconds elapse between entries, the menu screen automatically disappears. The "PICTURE" menu allows you to adjust the picture setting, view higher quality pictures, reduce picture noise, and adjust the picture setting that is suitable for viewing video games. You can also change the size of the picture on the screen when you receive wide mode (16:9) picture signals. Move up or down to select the desired option (see the table below), then press . Move up or down to select "DRC1250", "DRC100" or "PROGRESSIVE"*, then press . Move up or down to select "DYNAMIC", "STANDARD", "HIFINE", "PERSONAL"** or "ADJUST", then press . Improve the picture quality of TV or video if a signal received is weak. Move up or down to select "ON", then press . [. . . ] There is local interference from cars, neon signs, hair dryers, power generators, etc. Do not use a hair dryer or other equipment near the projection TV. Broadcast signals are reflected by nearby mountains or buildings. The sound of the right picture is selected when TWIN pictures are displayed. [. . . ]