User manual SONY BRAVIA KDL-52S5100 QUICK SETUP GUIDE

[. . . ] Do not install the projection TV where it may be exposed to mechanical vibrations. avoid operating the projection TV at temperatures below 5°C (41°F). If the projection TV is transported directly from a cold to a warm location, or if the room temperature has changed suddenly, the picture may be blurred or show poor color. This is because moisture has condensed on the mirror or lenses inside. [. . . ] Press PROGR INDEX again, or: 1 Select "PROGRAM INDEX" from the "MULTI PICTURE" menu. You can also display multiple programs using the menu (see "Changing the MULTI PICTURE setting" on page 36). note · When displaying multiple programs, only the sound of the main screen is heard. You can enjoy stereo sound or bilingual programs of NICAM and A2 (German) stereo systems. Press A/B repeatedly until you receive the sound you want. The on-screen display changes to show the selected sound and the indicator on the projection TV lights up red. If the signal is very weak, the sound becomes monaural automatically. ⷠIf the stereo sound is noisy when receiving a NICAM program, select "MONO". The sound becomes monaural, but the noise is reduced. ⷠBefore receiving a NICAM stereo program in China, please check the NICAM broadcast condition at your area. When receiving a NICAM stereo program, the receiving conditions might vary depending on area. ⷠIf the equipment does not have a certain function, the corresponding button on the remote will not operate. Move up or down to select either "DRC-MF", "PICTURE MODE", "SOUND MODE", or "SPEAKER", then press . Move up or down to select the desired option, then press . * When the "PERSONAL" mode is selected, the last adjusted picture/sound settings from the "ADJUST" option are received (see page 34). Move up or down to select the desired item (e. Adjust the value according to the following table, then press For Move down or left to Move "PICTURE" decrease picture contrast "COLOR" "BRIGHT" "HUE"* "SHARP" decrease color intensity darken the picture increase red picture tones soften the picture Increase picture contrast increase color intensity brighten the picture increase green picture tones sharpen the picture Repeat the above steps to adjust other items. The adjusted settings will be received when you select "PERSONAL". Move up or down to select the desired item (e. Adjust the value according to the following table, then press Down or left to decrease the bass, up or right to increase the bass. Down or left to decrease the treble, up or right to increase the treble. Down or left to increase the left speaker's volume, up or right to increase the right speaker's volume. [. . . ] There is local interference from cars, neon signs, hair dryers, power generators, etc. Broadcast signals are reflected by nearby mountains or buildings. Locate external speakers or other equipment away from the projection TV. Do not move the projection TV while the projection TV is turned on. [. . . ]