User manual SONY BRAVIA KDL-52WL140

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antennas. [. . . ] The adjustment is completed when the TV picture returns. , To Obtain Optimum Convergence for Digital TV Programs The optimum convergence alignment varies with digital TV formats. Whenever you find that the picture blurs, press FLASH FOCUS. You cannot perform any other functions until Flash Focus has completed its cycle. If you perform any other operation while Flash Focus is in progress, the Flash Focus operation is canceled. 36 Using the Projection TV Features Overview This chapter describes how to use features of your projection TV. Topic Page Using the Program Guide Using the Scrolling Channel Index Using Favorite Channels Using Wide Screen Mode Using Twin View Using the Freeze Function Using the i. LINK Control Panel Using the Timer 38 39 40 43 44 47 48 49 37 Using the Projection TV Features Using the Program Guide The Program Guide lets you select digital channels and subchannels and review program information from an on-screen list. Subchannels are additional channels of programming broadcast simultaneously. For example, channel 4 might include five subchannels (4. 1, 4. 2, 4. 3, 4. 4, 4. 5) that are showing programs at the same time. Analog channels are not available in the Guide. 1 Press GUIDE. z The Guide is not available while using any of the multipicture functions, such as Twin View, Freeze, Scrolling Channel Index, or Favorites. The Program Guide appears, with the currently selected program showing in the background. z As an alternative to using the Guide you can select subchannels directly using the 0-9 buttons and the button on the remote control. For example, to select channel 4. 1, press 4 + + 1 and then ENTER. Program information in the Program Guide is provided by the broadcasters. As a result, the Program Guide may sometimes include only the channel number without a program title or description. 2 Move the joystick V and v to highlight the channel you want to watch. The program on that channel appears in the background. 3 To remove the Program Guide and watch the highlighted channel, press . To exit the Program Guide without changing the channel Press EXIT or GUIDE. 38 Using the Projection TV Features Using the Scrolling Channel Index The Scrolling Channel Index lets you select programs from a scrolling index of video pictures. 1 Press INDEX. The Scrolling Channel Index appears, with the currently selected program in the main (left) window, and four scrolling video pictures in the right. Live preview window As each picture on the right scrolls to the live preview window, it changes briefly from a frozen video picture to a live video. The right side continues to scroll through the entire channel list. 2 To change the direction of the scrolling, move the joystick V or v. 3 To change the speed of the scrolling, move and hold the joystick V or v. 4 To change a frozen video picture to a live video, move the joystick V or v to highlight the picture, then press (left) window of the Scrolling Channel Index, press To exit the Scrolling Channel Index Press EXIT or INDEX. . again. 5 To move the live video (from step 4) from the right to the main 39 Using the Projection TV Features Using Favorite Channels You can store up to 16 of your favorite channels in the Favorite Channels list. You can use the Surf Favorites feature to preview and select channels directly from the list. If you are viewing a 4:3 source and a 16:9 enhanced source (such as a DVD) side by side in Twin View, the 4:3 source will appear larger. Twin View is not available while viewing i. LINK devices. , 45 Using the Projection TV Features Changing the Picture Size The zoom feature lets you vary the relative size of the left and right pictures. 1 Activate the picture whose size you want to change. 2 Move the joystick V to enlarge the picture. 3 Move the joystick v to make the picture smaller. When you adjust the twin screen sizes, the projection TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear. 46 Using the Projection TV Features Using the Freeze Function The FREEZE button allows you to temporarily capture a program's picture. You can use this feature to write down information such as phone numbers, recipes, etc. The Freeze feature is not available while using Twin View. 1 When the program information you want to capture is displayed, press the FREEZE button. 2 The projection TV switches to Twin View mode and displays the "frozen" picture on the right, while the current program continues on the left. Current program in progress Call 555-1234 Frozen picture 3 To cancel and return to normal viewing, press the FREEZE or EXIT button. 47 Using the Projection TV Features Using the i. LINK Control Panel The i. LINK Control Panel lets you see a list of i. LINK devices that are connected to and communicating with the projection TV. At the time this TV went to market, the Sony digital cable set-top box (DHGM55CV) is the only i. LINK device that is verified to be compatible with this TV. Some early versions of the Sony digital cable set-top box (DHG-M55CV) may not support an i. LINK digital connection to your TV. If you have difficulty with the connection between your Sony digital cable set-top box (DHG-M55CV) and your TV, contact Customer Information Service Center at 1-800-222SONY(7669). In most cases you can continue to use your set-top box with your TV, using and analog audio/video connection (as shown on page 31), instead of the i. LINK digital connection (also shown on page 31). z You can also access the i. LINK Control Panel using the the button on the projection TV's front panel. For details, see page 13. 1 To display the i. LINK Control Panel, press the button. The i. LINK Control Panel appears, which displays a list of i. LINK devices that are set to Show in the i. LINK Setup menu (page 65). If the i. LINK device is not listed in the i. LINK Control Panel, you need to change the i. LINK Setup option from Hide to Show (see page 65). The projection TV is always the first device listed. If other i. LINK devices are connected, they are listed according to their manufacturer's model name. If there are duplicate models connected, they are also designated a number (1, 2, 3, etc. ). [. . . ] Use Auto Program in the Channel Setup menu to add receivable channels that are not presently in memory (see page 58). Increase the volume of the cable box using the cable box's remote control. Then press TV (FUNCTION) and adjust the projection TV's volume. If you cannot receive DTV channels, see "Digital Signal Strength" on page 59. [. . . ]