User manual SONY KDL-60EX700

[. . . ] When an alternative type of plug is used it should be fitted with a 13 AMP FUSE, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] ⷠIf an age restriction for programmes has been selected, a message asking for pin code will appear on the screen. Set a programme to be displayed automatically on the screen when it starts ­ Reminder Do this 1 2 3 4 Press F/f/G/g to select the future programme you want to display. Note If you switch the TV to standby mode, it will automatically turn itself on when the programme is about to start. Set the time and date of a programme you want to record ­ Manual timer REC Set the start and stop time in the same way as in step 3. Press F/f to select the programme, then press to set the TV and your VCR timers. You can set VCR timer recording on the TV only for Smartlink compatible VCRs. If your VCR is not Smartlink compatible, a message will be displayed to remind you to set your VCR timer. ⷠOnce a recording has begun, you can switch the TV to standby mode, but do not switch off the TV completely or the recording may be cancelled. ⷠIf an age restriction for programmes has been selected, a message asking for pin code will appear on the screen. Press F/f to select the programme you want to cancel, then press . The Favourite feature allows you to select programs from a list of up to 8 channels you specify. Opens the Settings menu screen where most of advanced settings and adjustments are performed. Select a menu icon, select an option and make the desired change or adjustment using F/f/G/g. You can select the options listed below on the Picture menu. Selects whether to apply settings made in the Picture menu to all inputs, or only to the input currently being watched. "Custom": Allows you to store your preferred settings. Resets all picture settings except "Picture Mode" to the factory settings. "Cool": Gives the white colours a blue tint. "Warm2" gives a redder tint than "Warm1". tip "Warm1" and "Warm2" can only be selected when you set "Picture Mode" to "Custom". Reduces the picture noise (snowy picture) in a weak broadcast signal. When you set "Picture Mode" to "Custom", you can set/change these settings. [. . . ] The digital video and audio signals are input from the equipment. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 4 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment's audio out sockets to the audio in HDMI IN 4 sockets. note The HDMI sockets only support the following video inputs: 480i, 480p, 576i, 576p, 720p and 1080i. DVD player with component output F Video game equipment, DVD player or decoder G When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder. [. . . ]