User manual SONY KDL-60EX705

[. . . ] When an alternative type of plug is used it should be fitted with a 13 AMP FUSE, otherwise the circuit should be protected by a 13 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] â· Once a recording has begun, you can switch the TV to standby mode, but do not switch off the TV completely or the recording may be cancelled. â· If an age restriction for programmes has been selected, a message asking for pin code will appear on the screen. Press F/f to select the programme you want to cancel, then press . The Favourite feature allows you to select programs from a list of up to 8 channels you specify. * Please note that this function may not be available in some countries. Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list when you select "Digital Favourites" in the "MENU" for the first time. If you know the channel number, you can use the number buttons to directly select a channel. Channels that are stored in the Favourite list are indicated by a symbol. Channels that are stored in the Favourite list are indicated by a symbol. If you know the channel number, you can use the number buttons to directly select a channel. Press the blue button to return to the Favourite list. "Warm2" gives a redder tint than "Warm1". tip "Warm1" and "Warm2" can only be selected when you set "Picture Mode" to "Custom". Reduces the picture noise (snowy picture) in a weak broadcast signal. When you set "Picture Mode" to "Custom", you can set/change these settings. This setting is especially effective for dark images, increasing vibrancy in the picture. "Gamma": Adjusts the balance between bright and dark areas of the picture. You can select the options listed below on the Sound menu. Selects whether to apply settings made in the Sound menu to all inputs, or only to the input currently being watched. Also allows you to store your preferred settings. Resets the sound settings except "Sound Mode", "Dual Sound", "i Speaker Link" and "i Volume" to the factory settings. Keeps a constant volume level even when volume level gaps occur (e. [. . . ] The digital video and audio signals are input from the equipment. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 4 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment's audio out sockets to the audio in HDMI IN 4 sockets. note The HDMI sockets only support the following video inputs: 480i, 480p, 576i, 576p, 720p and 1080i. DVD player with component output F Video game equipment, DVD player or decoder G When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder. [. . . ]