User manual SONY KDL-60LX905

[. . . ] When an alternative type of plug is used it should be fitted with a 10 AMP FUSE (KDL-32D27xx, KDL-32T28xx, KDL-32S30xx, KDL-32D26xx, KDL-32T30xx), 13 AMP FUSE (KDL-40D27xx, KDL-40T28xx, KDL-40S30xx, KDL-40D26xx, KDL-40T30xx) otherwise the circuit should be protected by a 10 AMP FUSE (KDL-32D27xx, KDL32T28xx, KDL-32S30xx, KDL-32D26xx, KDL-32T30xx), 13 AMP FUSE (KDL-40D27xx, KDL-40T28xx, KDL40S30xx, KDL-40D26xx, KDL-40T30xx) at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] Audio system DVD player PC (HDMI output) Blu-ray disc player Digital video camera Audio system DVD player PC (HDMI output) Blu-ray disc player Digital video camera DVD recorder VCR Decoder PC Hi-Fi audio equipment Video game equipment DVD player Decoder PC (HDMI output) Blu-ray disc player Digital video camera Audio system DVD player Continued Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. For other connected equipment Press / repeatedly until the desired input source (see below) appears on the screen. To avoid picture noise, do not connect the camcorder to the video socket 6 and the S video socket 6 at the same time. Z It is recommended to use a PC cable with ferrites. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN socket through a DVI-HDMI adaptor interface (not supplied), and connect the equipment's audio out sockets to the audio in HDMI IN sockets. Be sure to use only an HDMI cable that bears the HDMI logo. When HDMI control compatible equipment is connected, communication with the connected equipment is supported. You can select the options listed below on the Picture menu. Selects the picture mode except for PC input source. This picture setting was developed in collaboration with Sony Pictures Entertainment to faithfully reproduce movies as intended by their creators. "Cool": Gives the white colours a blue tint. Z "Warm" can not be selected when you set "Picture Mode" to "Vivid". Reduces the picture noise (snowy picture) in a weak broadcast signal. When you set "Picture Mode" to "Cinema" or "Standard", you can set/change these settings. This setting is especially effective for dark images scenes. "Live Colour" is not available when "Colour Space" is set to "Standard". Resets all picture settings except "Picture Mode" and "Display Mode" (only in PC mode) to the factory settings. "Brightness", "Colour", "Sharpness" and "Advanced Settings" are not available when "Picture Mode" is set to "Vivid" or when "Display Mode" is set to "text". [. . . ] If you do not want your software to be updated, set this option to "Off". "System Information": Displays the current software version and the signal level. "Time Zone": Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country/region. "Auto DST": Sets whether or not to automatically switch between summer time and winter time. [. . . ]