User manual SONY KDL-V40A12U

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 13 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] Press M/m to select the channel you want to add, then press OK. If there are more than five channels in the list, press the green button for the next five channels or press the red button for the previous five channels. If you know the channel number, you can use the number buttons to directly select a channel. Channels that are stored in the Favourite list are indicated by a symbol. Turn off the Favourite list Move through in the Favourite list Display the previous or next five channels See brief details on current programmes Watch a channel Add or remove channels in the Favourite list Channels that are stored in the Favourite list are indicated by a symbol. If there are more than five channels in the list, press the green button for the next five channels or press the red button for the previous five channels. If you know the channel number, you can use the number buttons to directly select a channel. Press the blue button to return to the Favourite list. A display appears to confirm that you want to delete all channels from the Favourite list. Switch on the connected equipment, then perform one of the following operation. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead Start playback on the connected equipment. For other connected equipment Press / repeatedly until the correct input symbol (see below) appears on the screen. 4: Component input signal through the Y, PB/CB, PR/CR sockets / 4, and audio input signal through the L/G/S/I, R/D/D/D sockets / 4. 5: Digital audio/video signal is input through the HDMI IN 5 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket. 6/ 6: Video input signal through the video socket 6, and audio input signal through the audio socket L/G/S/I (MONO), R/D/D/D sockets 6. Appears only if the equipment is connected to the S video socket 6 instead of the video socket 6, and S video input signal is input through the S video socket 6. The following options are available in each menu. Only the options that can be operated are displayed. You can select the options listed below on the Picture Adjustment menu. When you set "Mode" to "Vivid" or "Standard", you can adjust only "Mode", "Contrast", "Colour Tone", "Noise Reduction", and "Reset". Press M/m to select one of the following picture modes, then press OK. [. . . ] For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. Press 1 on the TV (right side) to switch it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When it is not flashing 1 Check the items in the tables below. No picture (screen is dark) and no sound No picture or no menu information from equipment connected to the scart connector Distorted picture Check that the optional equipment is on and press / repeatedly until the correct input symbol is displayed on the screen. [. . . ]