User manual SONY KDS-70Q006 BROCHURE

[. . . ] * Installation and removal require special expertise. Consult your product dealer for details. English SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. FCC NOTICE · P42VHA10W/P50XHA10W: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] E-26)". Picture Memory (PICTURE MEMORY) Press . This button can be used to recall the settings of the picture memories 1 ­ 8. Each time this button is pressed, the setting changes as follows. * For the picture memory settings, see "Picture Memory (P. E-27)". E-21 English WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 2 Press . The currently selected mode will appear. Press to select a desired picture mode. Each time you press , a different picture mode appears. The sequences used are as follows: When you are in a Video or S-video input mode Normal mode When you are in a Comp. video input mode When you are in an RGB input mode Wide1 mode * You can also use the buttons on the display's control panel to perform these steps. * Depending on the type of signal, some aspects may not be selected. Note · Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. · A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio. · Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement. For films, try to select a mode having the same aspect ratio as the original picture; this enables the director's original intentions to be preserved. Reference See P. E-28­E-29 for how to adjust the picture size and position. E-22 SCREEN SIZE Normal Displays pictures of normal size (i. e. , a 4:3 aspect ratio). Auto The screen size changes automatically in accordance with the contents of image software you use. Wide1 Displays natural-looking pictures of standard size on the wide screen. Picture of standard size Wide1 Wide2/Wide Ideal for displaying vertically extended pictures such as squeezed pictures and recorded HDTV programs. Vertically extended picture Wide2 Zoom1/Zoom Enlarges horizontally extended pictures equally in all directions to maintain the aspect ratio constant. Horizontally extended picture Zoom1 Zoom2 Reduces the height of horizontally extended pictures with captions, without eliminating the caption. Only the height of pictures is reduced, not the height of the caption. (Captions may not be easy to read, however, depending on the picture. ) Horizontally extended picture with caption Zoom2 ASPECT RATIO The following aspect ratios are available. *Some type of signal can not be selected. · Storing the setting of PICTURE (Picture Memory) Stores 8 patterns of adjustments set by PICTURE. Read out and store to suit your taste. In case of "Load" When setting "Load": Read out your desired Setting. (1) Select "Picture Memory" and press . "Picture Memory" selection screen The "Picture Memory" screen will appear. (2) Press or to select Load. (3) Select Data number to make Load. (4) Press to read out. In case of "Save" When setting "Save": Set to suit your taste and store. (1) Select "Picture Memory" and press . "Load" selection screen The "Picture Memory" screen will appear. (2) Press or to select Save. (3) Select Data number to make Save. (4) Press to save. * On-screen information disappears if you do not take any action for about 60 seconds. E-27 English · Setting Noise Reduction (Noise Reduction) ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERATION [EX. : ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION] You can make changes to all screen adjustment options in the POSITION/SIZE Menu. The changes you make will be stored for the selected input mode. [. . . ] · Check for incorrect battery orientation. · Check for distance from the display. · Check whether you are pointing the remote control transmitter properly at the display's receiver. · Check for any obstacle between the remote control and the display. [. . . ]