User manual SONY KDS-70R2000

[. . . ] Before operating the TV, please read the "Safety information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced with the same rating of fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] "DRC Mode" is not available when "Game Mode" is set to "On" or when using Freeze or PAP features; also not available when watching PC or 1080p sources. Customizes the level of detail ("Reality") and smoothness ("Clarity") for each input signal. For example, you can create a custom setting for your cable input's picture, and create another for your DVD player's pictures. As you move the z higher along the "Reality" axis, the picture becomes more detailed. As you move the z to the right along the "Clarity" axis, the picture becomes smoother. tip "DRC Palette" is not available when "Game Mode" is set to "On", "DRC Mode" is set to "Off" or when using Freeze or PAP features; also not available when watching PC or 1080p sources. When you set "Picture Mode" to "Custom", you can set/change these settings. "Gamma": Adjusts the balance between bright and dark areas of the picture. "Detail Enhancer" is not available when using Freeze or PAP features. You can select the options listed below on the Sound menu. For the input currently being viewed, select whether to use the common setting or to set each item separately. "Common": Applies common settings whose adjustments are shared with other inputs in which "Target Inputs" is set to "Common". AV1): Allows you to set each option separately for the current input. tip Set each input to "Common" if you require the same settings to apply to each input. Also allows you to store your preferred settings. Resets all the "Sound" settings except "Target Inputs", "Sound Mode" and "Dual Sound" to the factory settings. Keeps a constant volume level even when volume level gaps occur (e. Adjusts the volume level of the current input relative to other inputs, when "Target Inputs" is set to the current input name (e. Gives sound more impact by compensating for phase effects in speakers using the "BBE High Definition Sound System", when "Sound Mode" is set to "Custom". "A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B" for sound channel 2, or "Mono" for a mono channel, if available. tip If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B". Sound menu options other than "Dual Sound" cannot be used for headphones and audio output sockets. [. . . ] No sound, but good picture Noisy sound The desired channel cannot be selected Some channels are blank Channel is used only for data (no picture or sound). Contact a local installer to find out if digital transmissions are provided in your area. If the inside of the TV grows warm while Cooling Mode is set to "High", the TV automatically switches to standby mode. (When Cooling Mode is set to "Normal" under the same conditions, the mode switches to "High", the cooling fan starts, and a loud whirring noise may be heard. [. . . ]