User manual SONY KE-P37M1

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] A/B/Mono For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available. If you select other equipment connected to the TV, set the Dual Sound option to Stereo, A, or B. Even if headphones are connected to the TV, you can hear the sound from the TV speakers. A/B/Mono For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available. â· If you select other equipment connected to the TV, set the i Dual Sound option to Stereo, A, or B. â· I Dual Sound works in conjunction with "Dual Sound. " Reset Cancel/OK Select OK to reset the sound to the factory preset. Only "Treble, " "Bass, " and "Balance" are restored to the factory settings when you reset the sound. 2 Press or to select On (if you want the TV to automatically switch the screen format according to the video input signal) or Off (if you want to keep your preference). Even if you have selected On or Off in the Auto Format option, you can always modify the format of the screen by pressing repeatedly on the remote control. 4:3 Conventional 4:3 picture size, full picture information. 14:9 Compromise between 4:3 and 16:9 picture size. You can adjust the position of the image when Smart, 14:9, or Zoom is selected. If parts of the top and bottom of the screen are cut off, press or to move the image up or down (e. Screen Shift The "Screen Shift" option allows you to adjust the position of the picture for each screen format. When "Screen Format" is set to "4:3" or "Wide, " V Shift (Vertical Shift) cannot be adjusted. The "Power Saving" option allows you to reduce the power consumption of the TV. If you switch the TV off then on again when the Power Saving option is set to Reduce, the setting remains unchanged. Speaker The "Speaker" Option allows you to select if you want to listen the TV from the TV speakers or from an external audio equipment connected to the audio output jacks . Main: The sound of the TV is output through the TV's speakers. Centre in: When an external amplifier is connected to the TV's CENTRE SPEAKER IN terminals, the centre speaker sound from the external amplifier is output through the TV's speakers. Off: The sound of the TV is output through the external audio equipment. [. . . ] Check if any connected optional equipment is installed in front of the TV or beside the TV. When installing optional equipment, leave some space between the optional equipment and the TV. â· Leave a space of 30 cm between your VCR and the TV to avoid noise. â· Avoid installing your VCR in front of the TV or beside the TV. [. . . ]