User manual SONY KE-P42M1

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] A) If you want to keep the broadcast channels in the tuned Order, go to step 8. B) If you want to store the broadcast channels in a different Order: 1 Press or to select the programme number with the channel you want to rearrange, then press . 2 Press or to select the new programme number position for your selected channel, then press . The selected channel now moves to its new programme position and the other channels move accordingly. 3 Repeat steps 1 and 2 if you want to change the order of the other channels. Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the remote control to operate the menu system. The "Picture Adjustment" menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter, press OK, then press // or repeatedly to adjust it. This menu also allows you to customise the picture quality for the "Personal" mode based on the programme you are watching. NR (Noise Reduction) cannot be adjusted for an input signal from the Y, PB/CB, PR/CR jacks of Dynamic Picture Colour Tone Reset On/Off Select to enhance the picture contrast. Cool/Normal/Warm Select to give bright colours a red tint (setting is variable from Cool to Warm). Cancel/OK Select OK to reset the picture to the factory preset levels. Only "Mode, " "Contrast, " and "Reset" can be adjusted when "Mode" is set to "Live" or "Movie. The "Sound Adjustment" menu allows you to alter the sound adjustments. To do this: After selecting the item you want to alter, press OK, then press / / or repeatedly to adjust it. Natural Enhances clarity, detail and presence of sound by using the "BBE High Definition Sound system. " Dynamic Intensifies clarity and presence of sound for better intelligibility and musical realism by using the "BBE High Definition Sound system. If you set "Auto Volume" to "On" when Dolby Virtual is selected, the Effect option automatically changes to Natural. â· The sound from the headphones is not effected when the Effect option is set to Natural, Dynamic or Dolby Virtual. On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e. When the "Speaker" option in the "Features" menu is set to "Centre in, " the options in the "Sound Adjustment" menu cannot be adjusted. [. . . ] When installing optional equipment, leave some space between the optional equipment and the TV. â· Leave a space of 30 cm between your VCR and the TV to avoid noise. â· Avoid installing your VCR in front of the TV or beside the TV. â· Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings (page 33). [. . . ]