User manual SONY KE-P50MRX1

[. . . ] Do not connect to the mains before all connections are complete. After following this step by step guide you will be able to: Select the country in which you wish to operate the set. [. . . ] (for details of how to manually programme these presets, see page 35, step A of the instruction manual). Refer to your VCR instruction manual to find out how to find the output channel of your VCR. Before installing the display unit, check the installation instructions of your wall-mount bracket or stand. Selecting the language of the menu screens, the country and setting the current time This TV set works with menu screens. By following the instructions below, you can select the desired language of the menu screens, the country in which you wish to operate the TV set and set the current time. The first time you press the Power switch, a Language menu displays automatically on the TV screen. By following the instructions below, this set automatically searches and stores all available channels for you. By following the instrutions below, you can rearrange the order in which the broadcast channels appear on the screen. A) If you wish to keep the broadcast channels in the tuned order: Button on the remote control to select the language, then press the OK button to confirm your selection. 2 The TV starts to automatically search and Your set is now ready for use. Please be patient and do not press any buttons while the auto tuning is in progress, otherwise the auto tuning will not be completed. If the TV is off, press the Power switch on the media receiver unit to turn on the TV. [. . . ] Follow the instructions and finally press the OK button to remove the picture and continue the automatic tuning process. The connection diagram should be used as a guide only as most equipment can be connected to more than one type of TV socket. [. . . ]