User manual SONY KF-50SX100

[. . . ] Thank you for choosing this Sony "Grand Wega" model. Before operating the set, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show the buttons you have to press to follow the sequence of instructions. To prevent fire or electric shock, please follow the safety guidelines indicated in the blue sheet supplied. [. . . ] Push the joystick $ or 4 to select RGB Set Up then push z to enter. Push the joystick z to enter H Centre, then push $ or 4 to adjust the centre of the picture over a range of -10 to +10. This function enables you to select the size of the picture coming from the input source as well as designate a name to the optional equipment you have connected to the sockets of this set. This name can contain up to 5 characters (letters or numbers). Push the joystick $ to select the enter the Set Up menu. Push the joystick $ or 4 to select AV Preset, then push z to enter. Push the joystick $ or 4 to select: $ Off (size of picture is not automatically adjusted). Normal (size of picture is automatically adjusted according to the broadcaster information). 4 Full (The set automatically adjusts the picture size to eliminate any dark areas on the TV picture (as shown on the section "Changing the Screen Format"). With the first element of the LABEL column highlighted, push the joystick $ or 4 to select a letter, number, "+" or blank; then push z to confirm this character. Repeat steps 4 to 7 if you wish to select the picture size or label other input sources. Whenever the equipment with the labelled input is selected for use, the name appears for a few seconds on the screen You can manually select which channel you wish to watch, either full-screen or in the PIP. Now 13 programme positions appear on the screen, with the current channel in the centre. Push the joystick $, 4, Z or z to move within the 13 displayed channels. PAP divides the screen into two for watching two channels simultaneously. One of the pictures can be selected to come from a video source. The sound of the left screen comes through the set loudspeakers, the sound of the right screen is selectable via headphones. With PAP switched on, press the number buttons (to select a TV channel) or press . When the symbol appears at the bottom of the right screen, press the number buttons (to select a TV channel) or press . With PAP switched on, press the swap the two screens. With PAP switched on, push the joystick repeatedly Z or z to change the size of the two screens. You can select the sound of the right screen via headphones. [. . . ] Here are some simple solutions to the problems which may affect the picture and sound. Turn the set off for 3 or 4 seconds and then turn it on again using the button on the front of the set. Poor or no picture (screen is dark), but good sound. Poor picture quality when watching a RGB video source. [. . . ]