User manual SONY KF-50SX200

[. . . ] Thank you for choosing this Sony "Grand Wega" model. Before operating the TV set, please read this manual thoroughly and retain it for future reference. Buttons shaded white on the remote control show the buttons you have to press to follow the sequence of instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] Push the joystick to or to select a letter, number, + or a blank; then push to confirm this character. A new menu automatically appears on the screen asking you to be sure that you want to save this ID. A) If you do not wish to store this ID, push the joystick repeat steps 4 to 6 to enter a new ID. B) If you wish to store this ID, press the button. Remember that this code can only be input once. When you enter the Manual Set Up menu, in the "Personal ID" option the code you entered above will be displayed. You will not be able to select and change this option. This function provides an overview of some of the features available on this TV set. Push the joystick to select the enter the Set Up menu. Push or to select Demo, then push the demonstration. The TV set starts the demonstration and shows most of the available picture functions. When connecting an RGB source, such as a DVD player, to Scart connector :1/ the H Centre of the picture. 1 or :2/ 2 you may need to readjust Push the joystick to select the enter the Set Up menu. Push the joystick to enter H Centre, then push or to adjust the centre of the picture over a range of -10 to +10. This function enables you to select the size of the picture coming from the input source. It also allows you to assign a name to the optional equipment you have connected to the sockets of this TV set. This name can contain up to 5 characters (letters or numbers). (The size of picture is not automatically adjusted). Normal (The size of picture is automatically adjusted according to the broadcaster information). Full (The TV set automatically adjusts the picture size to eliminate any dark areas on the TV picture (as shown in the section "Changing the Screen Format"). With the first element of the LABEL column highlighted, push the joystick or to select a letter, number, "+" or blank; then push to confirm this character. Repeat steps 4 to 7 if you wish to select the picture size or label other input sources. [. . . ] Poor picture quality when watching a RGB video source. Good picture, no sound Distorted picture when changing programmes or selecting teletext Striped picture No unscrambling or unstable picture whilst viewing a scrambled channel with a decoder connected through the Scart connector :3/q 3 (SMARTLINK) Remote control does not function Check that the Media Selector on the remote control is set to the device you are using (VCR, TV or DVD). â· If the remote control does not operate the VCR or DVD even when the Media Selector has been set correctly. Enter the necessary code set as explained on "Remote Controll Configuratio for VCR/DVD" chapter of this instruction manual. [. . . ]