User manual SONY KF-50XBR800

[. . . ] 4-091-169-12(1) LCD Projection TV KF-50XBR800/60XBR800 © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the LCD Projection TV to rain or moisture. Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Use of this television receiver for other than private viewing of programs broadcast on UHF, VHF, transmitted by cable companies or satellite for the use of the general public may require authorization from the broadcaster/cable company and/or program owner. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Mild: Select to smooth the outline of digital image. When you select each mode, you can also adjust the picture quality (such as Brightness, Color, etc. ) to suit your taste. For details, see "Mode" on page 67. RM-Y912 48 Using the Features Watching Digital TV When you have connected the DTV receiver, you can enjoy digital TV programs. This LCD projection TV is capable of receiving the 1080i, 720p, 480p and 480i digital TV formats. To view a digital TV program 1 2 3 4 Connect the DTV receiver to HD/DVD IN 5 or 6 on the LCD projection TV (for details, see page 39). Press TV/VIDEO to select HD/DVD IN 5 or 6. Select a digital channel on the DTV receiver. For details, see the Operating Manual of the DTV receiver. Adjust the volume of the LCD projection TV as necessary. Using the Features 49 Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you preset. Creating a List of Favorite Channels 1 2 3 4 5 Press MENU to display the Menu. Press B or b to highlight the Channel icon and press Press to select Favorite Channels. . Press V or v to highlight a Favorite Channel number (1-8) and press . Press V or v to highlight a channel you want to assign to the Favorite Channel number. A preview of the highlighted channel appears in the upper right of the screen. Press to select that channel as a Favorite Channel. 6 7 Displaying a List of Favorite Channels To add more channels to your favorites list, repeat steps 4-5. To clear a Favorite Channel, press V or v to highlight the channel you want to clear. Press MENU to exit the Menu. z For details on using the Channel Menu, see page 73. 1 Press FAVORITES. The Favorite Channel options appear. Preview window Favorites 10 ABC 20 HBO 36 MTV 6 FOX 8 CBS 37 COMED 40 9 Exit Favorite Channels 2 Press V or v to highlight the channel you want to watch. The program of that channel appears in the preview window. However, you cannot select the channel by using V or v. When the remote control mode is set to other than TV mode, you can z To assign Channel Labels (e. g. , ABC, HBO, MTV, etc. ) to channel numbers, as shown at right, use the Channel Label feature in the Channel Menu (see page 74). 50 Using the Features Using Twin ViewTM Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures. Activating Twin Pictures To display twin pictures 1 2 Using the Features Make sure your LCD projection TV is tuned to a working channel. Press . To cancel twin pictures again (or press Press ). Activating the Picture Although two pictures appear on the screen at the same time, only one picture is active. Change the picture size by using the V or v button. For an active picture, you can: Change channels. Switch the input sources from VHF/UHF to cable by pressing ANT or TV/VIDEO to switch the video input. To activate the right picture Press b. To activate the left picture Press B. 51 Using the Features Hookups that affect your ability to use Twin View: - If you are viewing all channels through the cable box, the Twin View feature will not work. [. . . ] Try changing channels in either the main picture or the window picture. You may be running all your channels through a cable box. The cable box will only unscramble one signal at a time, so you cannot use the Twin View feature. If possible, run a direct cable to your LCD projection TV's VHF/UHF input (this will only work if your cable system provides an unscrambled signal. ) Be sure the video label has not been set to skip your video inputs. [. . . ]