User manual SONY KF-60DX100

[. . . ] 4-086-249-12(2) WARNING To prevent fire or shock hazard, do not expose the LCD Projection TV to rain or moisture. Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Use of this television receiver for other than private viewing of programs broadcast on UHF, VHF, transmitted by cable companies or satellite for the use of the general public may require authorization from the broadcaster/cable company and/or program owner. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] GUIDE qk MENU ql CH +/­ Displays the program guide of your satellite. Press to display the LCD projection TV on-screen menu. z To scan rapidly through the channels, press and hold down CH+ or CH­. qh 0 ­ 9 and ENTER qj w; CINEMOTION Press to turn on and off the CineMotion mode. For details, see "Using the Video Menu" on page 58. wa WIDE MODE Press to step through the wide screen modes: Wide Zoom, Normal, Full and Zoom. For details, see "Using Wide Screen Mode" on page 56. 44 Using the Features Inside Panel Button Description 1 SYSTEM OFF Press to turn off the LCD projection TV and all equipment connected with S-Link. 2N 3m 4 REC 5x 6 DVD MENU 7 MTS/SAP 8 CODE SET Play Rewind Record Using the Features Stop Displays the DVD menu. Press to scroll through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP, and Mono. Used for programming the remote control to operate nonSony video equipment. For details, see "Programming the Remote Control" on page 77. Press to turn on the DVD/VCR player you have programmed into the remote control. For instructions, see "Programming the Remote Control" on page 77. Fast-forward Use to switch control for connected video equipment. You can program one video source for each switch position. For details, see "Programming the Remote Control" on page 77. Pause (Press again to resume normal playback) Displays the Video equipment menu. 9 POWER q; M qa qs X qd MENU qf M, m, <, , , Use to operate the DVD menu. and ENTER qg Press to select an audio option: Steady Sound ON or OFF. 45 Using the Features Watching the TV Many TV features can be accessed directly through the remote control. The following will explain the function of some of the buttons found on your remote control. Buttons for LCD Projection TV Operations 1 TV (FUNCTION) Activates the remote control for use with the LCD projection TV. 2 ANT-- (AUX input) Press to change between the VHF/UHF input and the AUX input. 3 TV (POWER) Turns the LCD projection TV on and off. If a video input indication (e. g. , VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/ ­ until a channel number appears. 4 0-9 and ENTER Use for direct channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0). The channel will change after 2 seconds, or you can press ENTER for immediate selection. 5 CH +/­ Press to scan through the channels (+ up or ­ down). 6 VOL +/­ Press to adjust the volume (+ up or ­ down). 7 JUMP Press to alternate or jump back and forth between two channels. The LCD projection TV will jump between the current channel and the last channel selected. 8 MUTING Press to mute the sound. [. . . ] For example, if you are using your cable to control channels, be sure to press SAT/CABLE. Be sure the Video Label feature has not been set to Skip (see page 68). Other Information LCD projection TV is fixed to one channel Double images, ghosts, or merged colors Cannot operate menu Cannot receive any channels when using cable TV Cannot gain enough volume when using a cable box Channel Index does not display all available channels Cannot receive channels Unable to select a channel Lost password Cannot change channels with the remote control Cannot cycle through the other video equipment connected to the LCD projection TV There is a black box on the screen You have selected a text option in the Setup menu and no text is available. (see page 67 to reset Setup selections) To turn this feature off, select OFF in the Caption Vision option. [. . . ]