User manual SONY KL-37W1U

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Dangerously high voltages are present inside the set. To prevent fire or electric shock, please follow the safety procedures below. To remove dust from the front of the screen, unplug the TV and wipe gently with a soft cloth lightly dampened with water or a mild detergent solution, using vertical strokes only. [. . . ] Watching a video input picture To go back to the normal TV picture, press . They will disappear after a few seconds. Press twice to have the programme number and label stay on screen. To go back to the normal TV picture Press MENU. You can select a time period after which the TV automatically switches into standby mode. The time period (in minutes) changes as follows: 10 n 20 n 30 n 40 n 50 n 60 n 70 n 80 n 90 4 After selecting the time period, press OK. The cursor moves back to the left margin and the timer starts counting. One minute before the TV switches into standby mode, a message is displayed on the screen. With this function you can display two screens at the same time. In this way you can watch two TV programmes at the same time. Also you can watch or monitor the video output from any connected equipment (for example from a VCR) while watching TV or vice versa. For information about connection of other equipment, refer to page 23. The PAP screen will come from the source chosen when the TV was last used. The symbol > will be displayed at the bottom, left-hand corner of the screen. The sound of the right screen is only available via the headphones. â· The picture quality of the TV screen and PAP may differ. You have the possibility to "freeze" the picture of the PAP screen. Press once to freeze and twice to return to the normal screen. Using the Screen Mode menu you have the possibility to change the aspect ratio for the TV display for wide screen effects, operate the PAP Mode or reproduce the main picture image by image (Strobe function). You have the choice among the following modes: 4:3 for normal ratio 4:3 (See Fig. Changing the Screen position (only for Zoom mode) When using the Zoom mode part of the picture at the top and bottom will be cut off. With the help of the function "Screen position" you can move the screen up- or downwards in order to see the cut-off part of the screen (e. [. . . ] Loosen two screws with the supplied wrench. Remove the front panel without moving the TV. Do not touch or stain the front glass of the new lamp or the glass of the lamp compartment. If the glass become dirty, the picture quality may deteriorate or the lamp life may shorten. [. . . ]