User manual SONY KLH-W26/ST

[. . . ] never use solvents or thinners for cleaning purposes. If the picture turns dark after the TV has been in use for a long period of time, it may be necessary to clean the inside of the TV. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] Most of the operations can be done using the simple side of the Remote Commander. The TV enters standby mode and the standby indicator on the front of the TV lights up in red. To switch on again Press , PROGR +/­, or one of the number buttons on the Remote Commander. Depress on the TV and indicator on the front of the TV lights up in amber. If no picture appears when you depress on the TV and if the standby indicator on the TV is lit, the TV is in standby mode. For example, If you want to choose 23, press -/--, 2 and 3. To reset picture and sound controls to the factory preset level (RESET function), press PROGR +/­ buttons simultaneously. For teletext operation, enter a 3-digit page number with the number buttons to select a page. for fastext operation , press one of the coloured buttons. For both operations, press (PAGE + ) for the next page or (PAGE ­ ) for the preceding page. To go back to the normal TV picture, press . In this way you can adjust all 5 graphic bars. ­ select the speed of the motion (3 different speeds are available). If you preset Auto Format to ON and the 16 : 9 format signal is being transmitted, the screen mode automatically changes from any mode to the 16 : 9 mode. When the 16 : 9 format programme is finished, the screen mode automatically returns to the previous mode. Teletext service allows you to receive various information pages such as weather reports or news at any time you want. 1 2 Select the TV channel which carries the teletext broadcast you want to watch. If there is no teletext broadcast, "No text available" is displayed on the information line at the top of the screen. With direct page selection Use the number buttons to input the three digits of the chosen page number. If you have made a mistake, type in any three digits. With page-catching 1 2 Select a teletext page with a page overview (e. Superimposing the teletext display on the TV programme Press _ once in teletext mode or twice in TV mode. [. . . ] The lamp is still too hot just after the power is turned off. Be careful that you don't touch the front glass or surrounding area of the lamp or the glass of the lamp compartment. Turn off the power and disconnect the power cord. Replace the lamp 30 minutes or more after the power is turned off. [. . . ]