User manual SONY KLV-21SG2

[. . . ] To prevent the risk of fire or electric shock, do not expose the TV set to rain or moisture. Dangerously high voltages are present inside the TV set. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. [. . . ] In TV menu: Moves through the options up (M) or down (m). Lights up in amber when the "Sleep Timer" is set. Lights up in green when "Picture Off" is set. Lights up in red when the TV is in standby mode. Lights up in green when the TV is switched on. Observe the correct polarity when inserting batteries. Do not use different types of batteries together or mix old and new batteries. Do not drop or step on it, or spill liquid of any kind onto it. Do not place the remote in a location near a heat source, or in a place subject to direct sunlight, or in a damp room. Connect your aerial with the coaxial cable. If connecting to an aerial only (A) Connect your aerial to the socket on the rear of the TV, then go to step 3. Turn off the TV completely Adjust the volume Mute the sound Press 1 on the top side of the TV. The following options are available in each menu. You can select the options listed below on the Picture Adjustment menu. When you set the "Picture Mode" option to "Vivid" or "Standard, " you can adjust only "Contrast, " and "Reset. Press m/M to select one of the following picture modes, then press OK. Custom: Allows you to store your own prefered settings. You can change the picture mode by pressing repeatedly. Press </, to set the level, then press OK. "Brightness", "Colour", "Hue", "Sharpness" and "Backlight" only appear and can be adjusted if "Picture Mode" is set to "Custom". Press m/M to select one of the following, then press OK. Cool: Gives the white colours a blue tint. [. . . ] connect to the audio output sockets to listen to the sound from the TV on Hi-Fi audio equipment. To turn off the sound of the TV speakers, go to "TV Speakers" on page 24. Power Requirements: 220­240 V AC, 50 Hz Screen Size: KLV-S40A10E: 40 inches KLV-S32A10E: 32 inches KLV-21SG2: 26 inches KLV-S23A10E: 23 inches KLV-S19A10E: 19 inches Display Resolution (dots x lines): KLV-S40A10E: 1366 dots x lines KLV-21SG2: 1366 dots x lines KLV-S23A10E: 1366 dots x lines KLV-S19A10E: 1280 dots x lines Power Consumption: KLV-S40A10E: 226 W KLV-S32A10E: 119 W KLV-21SG2: 81 W KLV-S23A10E: 71 W KLV-S19A10E: 56 W Standby Power Consumption: KLV-S40A10E: 0, 8 W KLV-S32A10E: 0, 5 W KLV-21SG2: 0, 5 W KLV-S23A10E: 0, 5 W KLV-S19A10E: 1 W Dimensions (w × h × d): KLV-S40A10E: Approx. Remove Hinge Cover (cover for bundling the cables) before removing Table Top Stand from the rear of the TV (SU-WL11 Wall Mount Bracket instructions. [. . . ]