User manual SONY KLV-21SR2

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] If you switch the TV off then on again when the Power Saving option is set to Reduce, the setting remains unchanged. Speaker The "Speaker" option allows you to control the sound of the TV speakers when external audio equipment is connected. On The sound of the TV is output through the TV speakers. Off The sound of the TV is not output through the TV speakers. The "AV2 Output" option allows you to select the source to be output from the Scart connector 2/ S 2. You can record from this Scart any signal coming from the TV or from external equipment connected to the other connectors. If your VCR supports SmartLink, this procedure is not necessary. If you select Auto, the output signal will always be the same one that is displayed on the screen. If you have connected a decoder to the Scart connector 2/ S 2 or to a VCR connected to this Scart, please remember to set AV2 Output to Auto for correct unscrambling. Even if AV2 Output is set to Auto, signals input through a "Memory Stick" are not output from Scart connector 2/ S 2. The "Language" option allows you to select the language that the menus are displayed in. 1 After selecting this option, press 2 Follow step 3 of "Switching On the TV and Tuning the TV Automatically" on page 29. The "Country" option allows you to select the country/region in which you want to operate the TV. 1 After selecting this option, press 2 Follow step 4 of "Switching On the TV and Tuning the TV Automatically" on page 29. The "Auto Tuning" option allows you to automatically search and store all available channels (TV Broadcast). Programme Sorting The "Programme Sorting" option allows you to change the order in which the channels (TV Broadcast) appear on the screen. Programme Labels The "Programme Labels" option allows you to name a channel using up to five characters (letters or numbers). 1 After selecting this option, press 2 Press or to select the programme number with the channel you want to name, then press OK. 3 Press // or to select the character, then press OK. 4 When you have finished, press // or to select the word "End" on the screen and press OK to exit the character input screen. If you input a wrong character, select the character using or the screen. Then press // or to select the correct character and press OK. [. . . ] Using the menu system, select the "Manual Programme Preset" option in the "Set Up" menu and adjust "AFT" (Automatic Fine Tuning) to obtain better picture reception (page 44). Using the menu system, set the "NR" (Noise Reduction) option in the "Picture Adjustment" menu to reduce the noise in the picture (page 33). Only snow and noise appear on the screen. Some tiny black points and/or bright points on the screen The picture is too bright. [. . . ]