User manual SONY KLV-40BX401

[. . . ] When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] for more details , refer to "Sleep Timer Function" on page 44. In addition to the TV functions, all coloured buttons are also used for Teletext operations. The buttons with green symbols (except for (NexTView) and (Power/Standby)) are also used. Make sure you insert the supplied batteries observing the correct polarity. Always remember to dispose of used batteries in an environmentally friendly way. Do not use different types of batteries together or mix old and new batteries. When you connect the cables, remove the rear cover of the TV. Be sure to attach the rear cover back on the TV after you finish connecting the cables. Hold the rear cover as illustrated below and pull the lower part of the cover towards you first. Then, detach the upper part of the cover from the TV. Hold the rear cover as illustrated below, fitting the four detents on the rear cover into the corresponding holes on the TV, then push the rear cover back onto the TV. If you want to store the broadcast channels in a different order: 1 Press or to select the programme number with the channel you want to rearrange, then press . 2 Press or to select the new programme number position for your selected channel, then press . The selected channel now moves to its new programme position and the other channels move accordingly. 3 Repeat steps 1 and 2 if you want to change the order of the other channels. Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the remote control to operate the menu system. To alter the settings of your selected option, press / To confirm your selection, press OK. The "Picture Adjustment" menu allows you to alter the picture adjustments. To do this: After selecting the item you want to alter, press , then press / / or repeatedly to adjust it. This menu also allows you to customise the picture quality for the "Personal" mode based on the programme you are watching. Cool/Normal/Warm Select to give bright colours a red tint (setting is variable from Cool to Warm). [. . . ] Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. Make sure that the aerial is connected using the supplied coaxial cable. Keep the aerial cable away from other connecting cables. Do not use 300-ohm twin lead cables as interference may occur. [. . . ]