User manual SONY KLV-40EX40B GUARANTEE DOCUMENTS

[. . . ] When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] 2 Press or to select On (if you want the TV to automatically switch the screen format according to the video input signal) or Off (if you want to keep your preference). Even if you have selected On or Off in the Auto Format option, you can always modify the format of the screen by pressing repeatedly on the remote control. To do this (KLV-26HG2): 1 After selecting this option, press . 4:3 Conventional 4:3 picture size, full picture information. 14:9 Compromise between 4:3 and 16:9 picture size. To do this (KLV-40EX40B): 1 After selecting this option, press . You can adjust the position of the image when Smart, 14:9, or Zoom is selected. If parts of the top and bottom of the screen are cut off, press or to move the image up or down (e. The "Screen Shift" option allows you to adjust the position of the picture for each screen format. When "Screen Format" is set to "4:3" or "Wide, " V Shift (Vertical Shift) cannot be adjusted. The "Power Saving" option allows you to reduce the power consumption of the TV. The "AV Preset" option allows you to designate a name for any external equipment you have connected to the TV. to do this: 1 After selecting this option , press . 2 Press or to select the input source you want to name, then press . 3 A label automatically appears in the label column. To select the a) If you want to use one of the predefined labels, press or desired label: AV1/AV2/AV3/AV4, VIDEO, DVD, CABLE, GAME, CAM or SAT. B) If you want to set a different label, select Edit and press OK. Then with the first element highlighted, press // or to select the character, then press OK. When you have finished, press // or to select the word "End" on the screen and press OK to exit the character input screen. If you input a wrong character, select the character using or on the screen. Then press // or to select the correct character and press OK. A) Preset channels, one by one, in the programme order of your choice. [. . . ] Keep the aerial cable away from other connecting cables. Do not use 300-ohm twin lead cables as interference may occur. Make sure that the output signal of the equipment connected to the Scart connector 2/ S 2 is not an RGB signal. Check if any connected optional equipment is installed in front of the TV or beside the TV. [. . . ]