User manual SONY KLV-40U2530

[. . . ] If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. FUSE How to replace the fuse Open the fuse compartment with a blade screwdriver, and replace the fuse. IMPORTANT If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Green-and-yellow Earth Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol I or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. [. . . ] A/B/Mono For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available. If you select other equipment connected to the TV, set the Dual Sound option to Stereo, A, or B. i Volume Press Press or or to turn the volume of the headphones down. to turn the volume of the headphones up. Even if headphones are connected to the TV, you can hear the sound from the TV speakers. i Dual Sound Select the "Dual Sound" option of the headphones. Stereo/Mono For a stereo broadcast, select Stereo or Mono. A/B/Mono For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available. · If you select other equipment connected to the TV, set the i Dual Sound option to Stereo, A, or B. · i Dual Sound works in conjunction with "Dual Sound. " Reset Cancel/OK Select OK to reset the sound to the factory preset. Only "Treble, " "Bass, " and "Balance" are restored to the factory settings when you reset the sound. 24 Menu System Screen Control Picture Adjustment Mode : Contrast : Brightness : Colour : Hue : Sharpness : Backlight : NR : Dynamic Picture : C olo u r Tone : Reset Personal 50 50 25 0 25 5 Auto On Cool The "Screen Control" menu allows you to alter the screen adjustments. Select: Set: OK End: MENU m Screen Control Auto Format : Screen Format : Screen Shift On Smart Screen Control Auto Format : Screen Format : Screen Shift On Smart , Select: Set: OK End: MENU Select: Set: OK Back: End: MENU Auto Format The "Auto Format" option allows you to automatically change the aspect ratio of the screen. To do this: 1 After selecting this option, press OK. 2 Press or to select On (if you want the TV to automatically switch the screen format according to the video input signal) or Off (if you want to keep your preference). · Even if you have selected On or Off in the Auto Format option, you can always modify the format of the screen by pressing repeatedly on the remote control. On: The sound of the TV is output through the TV's speakers. Off: The sound of the TV is output through the external audio equipment. If you have selected Off, the volume of the external equipment can also be altered by pressing the 2 +/­ buttons of the remote control. When the volume buttons are pressed, the % will appear indicating that the volume you are altering is not the volume of the TV's speakers, it is from the external equipment. AV2 Output The "AV2 Output" option allows you to select the source to be output from the Scart connector / S 2. You can record from this Scart any signal coming from the TV or from external equipment connected to the other connectors. If your VCR supports SmartLink, this procedure is not necessary. To do this: 1 After selecting this option, press OK. 2 Press or to select the desired output signal: Auto, TV or AV1. · If you select Auto, the output signal will always be the same one that is displayed on the screen. · If you have connected a decoder to the Scart connector / S 2 or to a VCR connected to this Scart, please remember to set AV2 Output to TV for correct unscrambling. [. . . ] · Make sure that the output signal of the equipment connected to the Scart connector / S 2 is not an RGB signal. If it is an RGB signal, please connect the equipment to the Scart connector / 1. · Check if any connected optional equipment is installed in front of the TV or beside the TV. When installing optional equipment, leave some space between the optional equipment and the TV. [. . . ]