User manual SONY KLV-L23M1

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] Cancel/OK Select OK to reset the picture to the factory preset levels. Only "Mode, " "Contrast, " and "Reset" can be adjusted when "Mode" is set to "Live" or "Movie. The "Sound Adjustment" menu allows you to alter the sound adjustments. To do this: After selecting the item you want to alter, press OK, then press / / or repeatedly to adjust it. Natural Enhances clarity, detail and presence of sound by using the "BBE High Definition Sound system*. " Dynamic Intensifies clarity and presence of sound for better intelligibility and musical realism by using the "BBE High Definition Sound system*. If you set "Auto Volume" to "On" when Dolby Virtual is selected, the Effect option automatically changes to Natural. â· The sound from the headphones is not affected when the Effect option is set to Natural, Dynamic or Dolby Virtual. On/Off Volume level of the channels will stay the same, independent of the broadcast signal (e. A/B/Mono For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available. If you select other equipment connected to the TV, set the Dual Sound option to Stereo, A, or B. Even if headphones are connected to the TV, you can hear the sound from the TV speakers. A/B/Mono For a bilingual broadcast, select A for sound channel 1, B for sound channel 2, or Mono for a mono channel, if available. â· If you select other equipment connected to the TV, set the i Dual Sound option to Stereo, A, or B. â· I Dual Sound works in conjunction with "Dual Sound. " Reset Cancel/OK Select OK to reset the sound to the factory preset. Only "Treble, " "Bass, " and "Balance" are restored to the factory settings when you reset the sound. 2 Press or to select On (if you want the TV to automatically switch the screen format according to the video input signal) or Off (if you want to keep your preference). Even if you have selected On or Off in the Auto Format option, you can always modify the format of the screen by pressing repeatedly on the remote control. 4:3 Conventional 4:3 picture size, full picture information. 14:9 Compromise between 4:3 and 16:9 picture size. You can adjust the position of the image when Smart, 14:9, or Zoom is selected. [. . . ] â· Make sure that the output signal of the equipment connected to the Scart connector / S 2 is not an RGB signal. Check if any connected optional equipment is installed in front of the TV or beside the TV. When installing optional equipment, leave some space between the optional equipment and the TV. â· Leave a space of 30 cm between your VCR and the TV to avoid noise. [. . . ]