User manual SONY KP-41PX2

[. . . ] Thank you for choosing this Sony 100 Hz Projection TV. Before operating the projection TV, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] If you select "AUTO", the output signal will always be the same one that is displayed on the screen. If you have connected a decoder to the Scart 3/ S 3 or to a VCR connected to this Scart, please remember to change back the "AV3 Output" to "AUTO" or "TV" for correct unscrambling. PIP INPUT The "PIP Input" option in the "Features" menu allows you to select the source you want to watch in the "PIP" screen. To watch the "PIP" screen with the selected source, press the / button on the remote control. Level 3 / Function PIP POSITION The "PIP Position" option in the "Features" menu allows you to change the position of the "PIP" screen within the main screen. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. Level 3 / Function MANUAL PROGRAMME PRESET The "Manual Programme Preset" option in the "Set Up" menu allows you to: A) Preset channels or the VCR channel one by one to the programme order of your choice. Press or to select which programme number you want to preset the channel on (for VCR, select programme number "0"). 2 The following option is only available depending on the country you have selected in the "Language/Country" menu. Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you have tuned the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. B) Label a channel using up to five characters. To do this: highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. After selecting all the characters, press OK twice to store. Normally the automatic fine tuning (AFT) will give the best possible picture, however you Can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press or to adjust the fine tuning between -15 and +15. [. . . ] â· Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen (see page 21). Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to factory settings (see page 12). â· This is not a malfunction. Using the menu system, select the "Manual Programme Preset" menu and adjust Fine Tuning (AFT) to obtain better picture reception (see page 16). [. . . ]