User manual SONY KP-41PZ1D

[. . . ] Thank you for choosing this Sony projection TV. Before operating the projection TV, please read this manual thoroughly and retain it for future reference. Reading and Understanding this Instruction Manual: · Use Getting Started if you wish to install the projection TV set and to get familiar with the basic functions. ⷠUse Advanced Operation if you wish to know more about the additional features of the projection TV set. [. . . ] ⷠIf you wish to change the channel order, proceed in the same way as described in the chapter "Changing the Programme Order of the TV channels", section b). Use this function to preset channels or a video input source one by one to the programme order of your choice. Push the joystick to $ to select the enter to the PRESET menu. Push the joystick to $ or 4 to select Manual Programme Preset, then push to z. Push the joystick to $ or 4 to select on which programme number you want to preset a channel, then push to z. Push the joystick to $ or 4 to select the channel tuning, "C" for terrestrial channels or "S" for cable channels, then push to z. Press the number buttons to enter the channel number of the TV Broadcast or push the joystick to 4 or $ to search for the next available channel. If you do not wish to store this channel, push the joystick to 4 or $ to continue searching for the desired channel. If this is the desired channel you wish to store, press the OK button. Repeat steps 4 to 8 if you wish to store more channels. Your projection TV is now ready for use. With this feature you can: a) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a better picture reception if the picture is distorted or b) preset the AV3 output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way a connected VCR records the unscrambled signal. Push the joystick to $ to select the enter to the PRESET menu. Push the joystick to $ or 4 to select Further Programme Preset, then push to z. Push the joystick to $ or 4 to select the relevant programme number, then push to z repeatedly to select: a) AFT or b) DECODER. Repeat steps 4 and 5a) if you wish to fine tune other channels. The picture from the decoder connected to the Euro AV :3 on the back of the projection TV will appear on this programme number. Repeat steps 4 and 5b) to preset the AV3 output for other programme positions. Your projection TV is now ready for use. This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to prevent children from watching programmes you consider unsuitable. [. . . ] Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR VTR 2 8 mm VCR VTR 3 VHS VCR VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk Use the buttons underneath the cover on the remote control to operate the equipment. ⷠIf your video equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV Remote Control. ⷠIf the equipment does not have a certain function, the corresponding button on the remote control does not work. Using this function you can record on your VCR any signal coming from an external equipment connected to the Euro AV connectors :2/q 2 or :3 placed on the rear of the projection TV. [. . . ]