User manual SONY KP-41PZ1E

[. . . ] To keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth slightly dampened with a mild detergent solution. Never use strong solvents such as thinner or benzene, or abrasive cleaners since these will damage the cabinet. As a safety precaution, unplug the TV before cleaning it. [. . . ] 7 b) Search Push the joystick to blue or green to search for the next available channel. 8 If you want to store the channel, go to step 9. If not, select a new channel using the number button on the Remote Commander or push the joystick to blue or green to resume the search. If the picture is distorted, however, you can manually fine-tune the TV to obtain a better picture reception. Push the joystick to blue or green to select the symbol menu screen. Push to blue or green to select "Manual Programme". Push to blue or green to select the programme number which corresponds to the channel you want to manually fine-tune. Push to yellow repeatedly until the AFT position changes colour. Push to blue or green to fine-tune the channel frequency (­15 to +15). Repeat steps 4 to 7 to fine-tune other channels. This function enables you to sort the programme positions to a preferable order. Push to green or blue to select "Parental Lock". Push to green or blue to select the channel you want to block. The symbol appears before the programme position to indicate that this channel is now blocked. You can tune in to a channel temporarily, even though it has not been preset. Enter the double-digit channel number using the number buttons (e. Note After you tune in a channel temporarily, you cannot enter the manual preset mode. This section explains the basic functions you use while watching the TV. Most operations are done using the Remote Commander. The TV enters standby mode and the standby indicator on the front of the TV lights up in red. To switch on again Press O, PROGR +/­, or one of the number buttons on the Remote Commander. Depress U on the TV and the indicator on the front of the TV lights up in amber. [. . . ] Push to blue or green to select the desired input source. Push to blue or green to select a letter or number. Push to yellow (select "-" for a blank). Repeat steps 4 to 6 to label other input sources. [. . . ]