User manual SONY KP-41S4B

[. . . ] Shaded buttons on the remote control show the buttons you have to press to follow the sequence of instructions. informs you of the result of the instructions. The process continues on the next page to get final result. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] However, if you wish to rearrange the order of the channels afterwards, select the menu Programme Sorting in the (PRESET) menu and proceed in the same way as described in the b) section of this chapter. A) If you do not wish to change the channel order: When the automatic tuning is finished, the Programme Sorting menu appears on the screen. Programme number with the channel (TV Broadcast) you wish to rearrange, then press OK. Push the joystick to $ or 4 to select the new programme number position for your selected channel (TV Broadcast), then press OK. The selected channel now moves to its new programme position and the other channels move accordingly. Repeat steps 1 and 2 if you wish to change the order of the other channels. Your projection TV is now ready for use. Due to the earth's magnetism, the picture might become undefined and you could see different colours on the outlines of the images. Auto converge the Red, Green, and Blue Lines 1 Push up the flap on the front of the projection TV to reveal the front The Auto Convergence function works for about 30 seconds. When the white cross disappears from the screen, your projection TV is ready for use. If you wish a more accurate convergence adjustment , then push to z to enter Lines in red and blue) you want to adjust. Your projection TV is now ready for use. This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to prevent children from watching programmes you consider unsuitable. Symbol, then push to z to enter Push the joystick to $ or 4 to select Parental Lock, then push to z . Push the joystick to $ or 4 to select the programme number with the channel you wish to block, then press the OK button. The symbol appears before the programme position to indicate this programme is now blocked. Repeat step 4 if you wish to block other channels. When you select a blocked programme the screen appears in black, with symbol. You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the appropriate TV system (B/G or D/K) instead of "- - -" in step 5. Symbol, then push to z to enter Push the joystick to $ or 4 to select Manual Programme Preset, then push to z . [. . . ] For more details, please refer to the section "Using the Further Programme Preset function" of this instruction manual. For more information on Smartlink, please refer to the Instruction Manual of your VCR. Using the buttons underneath the cover of the remote control you can control other Sony equipment. Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR VTR 2 8 mm VCR VTR 3 VHS VCR VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk Use the buttons underneath the cover on the remote control to operate the equipment. [. . . ]