User manual SONY KP-44DX2U

[. . . ] Before operating the TV, please read the "Safety Information" section of this manual. Retain this manual for future reference. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. [. . . ] Next with the Programme option highlighted, press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, select the Skip option and press b. Finally press OK twice to confirm and store. To cancel this function afterwards, select "No" instead of "Yes" in the step above. DETAIL SET UP Once you have entered into the "Set Up"menu as it is explained in the previous page and after selecting this option, press b to acess to the "RGB Centring" option which allows you to readjust the horizontal position of the picture in case you need to do it when connecting an RGB source. to do this: While watching an RGB source select the "RGB Centring" option and press b. Then press v or V to adjust the centre of the picture between ­10 and +10. This menu system gives you information on the programmes currently being shown as well as the those programmes which are on next. It also allows you to customise the Digital side of you TV. ⷠThe "Digital Menus" are only available when watching Digital Channels. The "Digital INFO" menu gives you information on the programmes currently being shown as well as the those programmes which are on next. Next read below how to operate each option. DIGITAL INFO DISPLAY This display gives you a brief description of the next programme in the schedule. If the programme box is blank, there is no information currently available. To return to the starting point, press the B button repeatedly until the description for the current programme reappears. Press the V or v button to highlight the language required then press OK to select. AUDIO This feature allows you to listen to the broadcast in different languages when the programme is broadcast in multiple languages. to do this: With the "Digital INFO display" on the TV screen , press the GREEN button to access the "Audio" pop-up menu. Press the V or v button to highlight the language required then press OK to select. press the MENU button to exit from this menu. REC/TIMER If you highlight a current programme, the REC feature allows you to automatically set your VCR to record the selected programme**. to do this: With the "Digital INFO display" on the TV screen , press the YELLOW button to access the "REC" pop-up menu. [. . . ] Design and specifications are subject to change without notice. Here are some simple solutions to problems which may affect the picture and sound. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to the factory settings (see page 15). ⷠMaybe there are no Digital transmissions in your area, contact a local installer to find out when digital transmissions begin in your area. [. . . ]