User manual SONY KP-44PX2

[. . . ] Thank you for choosing this Sony 100 Hz Projection TV. Before operating the projection TV, please read this manual thoroughly and retain it for future reference. Shaded buttons on the remote control show you the buttons you have to press to follow the sequence of the instructions. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. [. . . ] If your VCR supports Smartlink, this procedure is not necessary. If you select "AUTO", the output signal will always be the same one that is displayed on the screen. To do this: 1 After selecting the option, press , then press or to select the input source you wish to name (AV1, AV2 and AV3 are for the rear Scarts and AV4 for side connectors). 2 A label automatically appears in the label column: a) If you want to use one of the 6 predefined label (CABLE, GAME, CAM, DVD, VIDEO or SAT), press or to select the desired label and finally press OK to store. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. Level 3 / Function MANUAL PROGRAMME PRESET The "Manual Programme Preset" option in the "Set Up" menu allows you to: A) Preset channels or the VCR channel one by one to the programme order of your choice. Press or to select which programme number you want to preset the channel on (for VCR, select programme number "0"). 2 The following option is only available depending on the country you have selected in the "Language/Country" menu. Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When you tune the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. B) Label a channel using up to five characters. To do this: highlighting the Programme option, press the PROG +/- button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next press or to select a letter, number or "-" for a blank. After selecting all the characters, press OK twice to store. [. . . ] â· Check that the optional equipment is on and press the button repeatedly on the remote control until the correct input symbol is displayed on the screen. Using the menu system, select the "Picture Adjustment" menu and select "Reset" to return to factory settings. â· This is not a malfunction. Using the menu system, select the "Manual Programme Preset" menu and adjust Fine Tuning (AFT) to obtain better picture reception. [. . . ]