User manual SONY KP-44PX2U

[. . . ] A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i. When an alternative type of plug is used it should be fitted with a 5 AMP FUSE, otherwise the circuit should be protected by a 5 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] Resets the sound to the factory preset levels. Off: volume level changes according to the broadcast signal. On: volume level of the channels will stay the same, independent of the broadcast signal (e. If you are listening to the TV through headphones, the "Effect" option will automatically be switched to "Off". Level 3 / Function PIP INPUT The "PIP Input" option in the "Features" menu allows you to select the source you want to watch in the "PIP" screen. To watch the "PIP" screen with the selected source, press the / button on the remote control. PIP POSITION The "PIP Position" option in the "Features" menu allows you to change the position of the "PIP" screen within the main screen. LANGUAGE The "Language" option in the "Set Up" menu allows you to select the language that the menus are displayed in. To do this: after selecting the option, press and then proceed in the same way as in step 2 of the section "Switching On the Projection TV and Automatically Tuning" on page 8. AUTO TUNING The "Auto Tuning" option in the "Set Up" menu allows you to automatically search for and store all available TV channels. To do this: after selecting the option, press and then proceed in the same way as in the steps 3 and 4 of the section "Switching On the Projection TV and Automatically Tuning" on page 8. Level 3 / Function PROGRAMME SORTING The "Programme Sorting" option in the "Set Up" menu allows you to change the order in which the channels (TV Broadcast) appear on the screen. To do this: after selecting the option, press and then proceed in the same way as in step 5 b) of the section "Switching On the Projection TV and Automatically Tuning" on page 9. PROGRAMME LABELS The "Programme Labels" option in the "Set Up" menu allows you to name a channel using up to five characters (letters or numbers). To do this: 1 After selecting the option, press , then press or to select the programme number with the channel you wish to name. With the first element of the Label column highlighted, press or to select a letter or number (select "-" for a blank), then press to confirm this character. AV PRESET The "AV Preset" option in the "Set Up" menu allows you to designate a name to the external equipment you have connected to the input sockets of this projection TV. To do this: 1 After selecting the option, press , then press or to select the input source you wish to name (AV1, AV2 and AV3 are for the rear Scarts and AV4 for side connectors). 2 A label automatically appears in the label column: a) If you want to use one of the 6 predefined label (CABLE, GAME, CAM, DVD, VIDEO or SAT), press or to select the desired label and finally press OK to store. B) If you want to set a different label, select Edit and press . Then with the first element highlighted, press or to select a letter, number or "-" for a blank, then press to confirm this character. Select the other four characters in the same way and finally press OK to store. [. . . ] â· Not all brands are covered and not all models of every brand may be covered. For the best picture quality, try to position the projection TV so that you can view the screen from within the areas shown below. For more information on SmartLink, please refer to the Instruction Manual of your VCR). Design and specifications are subject to change without notice. [. . . ]