User manual SONY KP-53S4

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. If the plug supplied is not suitable for the socket outlets in your home, it should be cut off and an appropriate plug fitted in accordance with the following instructions: The wires in this mains lead are coloured in accordance with the following code: Blue Neutral Brown Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] Symbol, then push z to enter Push the joystick $ or 4 to select on which programme number you want to preset a broadcast channel (for VCR select programme number "0"), then push twice z. Push the joystick $ or 4 to select the system for TV Broadcast and VCR channel (B/G for western european countries, L for France, I for Great Britain or D/K for eastern european countries) or a external input source (EXT), then push z. Push the joystick $ or 4 to select the channel tuning, "C" for terrestrial channels (for TV Broadcast or VCR channel), "S" for cable channels or F for, direct frequency input then push z. A) If you know the channel number of the TV Broadcast, the VCR test signal channel or the frequency, press the number buttons to enter directly the channel number. With this feature you can: a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture). B) Individually adjust the volume level of each broadcast channel. C) Normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain better reception if the picture is distorted. D) Preset the AV output for the programme positions of broadcast channels with scrambled signals (eg from a pay TV decoder). In this way a connected VCR records the unscrambled signal. Symbol, then push z to enter Push the joystick $ or 4 to select Manual Set Up then push to z to enter. Push the joystick $ or 4 to select Further Programme Preset, then push z to enter. Push the joystick $ to select the enter the Set Up menu. Push the joystick $ or 4 to select Manual Set Up, then push to z to enter. Push $ or 4 to select Demo, then push z to enter and start the demonstration. The set starts the demonstration and shows most of the available picture functions. When connecting an RGB source, such as a DVD player, to the Scart connector :1/ of the picture. You may need to readjust the H Centre Symbol, then push z to enter the Push $ or 4 to select Manual Set Up then push z to enter. Push the joystick $ or 4 to select RGB Set Up then push z to enter. Push the joystick z to enter H Centre, then push $ or 4 to adjust the centre of the picture over a range of -10 to +10. This function enables you to select the size of the picture coming from the input source as well as designate a name to the optional equipment you have connected to the sockets of this set. This name can contain up to 5 characters (letters or numbers). Push the joystick $ to select the enter the Set Up menu. [. . . ] Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR VTR 2 8 mm VCR VTR 3 VHS VCR VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk Use the buttons underneath the cover on the remote control to operate the equipment. â· If your equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on this set Remote Control. â· If the equipment does not have a certain function, the corresponding button on the remote control will not work. For the best picture quality, try to position the set so that you can view the screen from within the areas shown below. [. . . ]